Refresh the page

Alza Benefit slevy - 3D Print

Program pro zaměstnance a VIP klienty zapojených firem a organizací

All from 113
eSUN PLA+Refill 1kg Bone White - Filament
eSUN PLA+Refill 1kg Bone White
499,-
In stock > 10 pcs
9 colors
Order by midnight, get it at the AlzaBox in the morning.
Info
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed:...
Creality Soleyin Ultra PLA 1kg Rosehip - Filament
Creality Soleyin Ultra PLA 1kg Rosehip
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Filament - made from PLA, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 300mm/s
Creality ABS 1kg Yellow - Filament
Creality ABS 1kg Yellow
499,-
In stock > 10 pcs
6 colors
Order by midnight, get it at the AlzaBox in the morning.
Info
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 110°C
eSUN PLA+Refill 1kg Fire Engine Red - Filament
eSUN PLA+Refill 1kg Fire Engine Red
499,-
In stock > 10 pcs
9 colors
Order by midnight, get it at the AlzaBox in the morning.
Info
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed:...
Creality ABS 1kg Grey - Filament
Creality ABS 1kg Grey
499,-
In stock > 10 pcs
6 colors
Order by midnight, get it at the AlzaBox in the morning.
Info
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 110°C
ESUN ePLA-Silk-Magic 1kg, Red gold - Filament
ESUN ePLA-Silk-Magic 1kg, Red gold
649,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Filament - made from PLA ePLA and silk, filament diameter: 1.7mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 45°C
Cricut Explore™ 5 Essential Bundle (Cream) - Cutting plotter
Cricut Explore™ 5 Essential Bundle (Cream)
New arrival 7,290,-
From 168,- per month
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Cutting plotter - 12" cutting plotter (30,5 cm), cuts 100+ materials (vinyl, iron-on, cardboard, printable), writing and drawing, creasing and foiling (depending on the tool),...
Cricut Maker 4 Essentials bundle - Cutting plotter
Cricut Maker 4 Essentials bundle
12,790,-
From 294,- per month
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Cutting plotter – cuts 300+ materials, Cutting width up to 29.7 cm, project length up to approx. 3.6 m with Smart Materials, up to 2x faster than previous generations, compatible...
Sunlu PLA Meta 1kg Lemon Yellow - Filament
Sunlu PLA Meta 1kg Lemon Yellow
419,-
In stock > 10 pcs
4 colors
Order by midnight, get it at the AlzaBox in the morning.
Info
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.02mm, weight: 1kg, print temperature: up to 195°C, print mat temperature: 60°C, recommended print speed:...
eSUN PLA+Refill 1kg Orange - Filament
eSUN PLA+Refill 1kg Orange
499,-
In stock > 10 pcs
9 colors
Order by midnight, get it at the AlzaBox in the morning.
Info
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed:...
Creality ABS 1kg Red - Filament
Creality ABS 1kg Red
499,-
In stock > 10 pcs
6 colors
Order by midnight, get it at the AlzaBox in the morning.
Info
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 110°C
Creality Soleyin Ultra PLA 1kg black - Filament
Creality Soleyin Ultra PLA 1kg black
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Filament - made from PLA, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 300mm/s
eSUN PLA+Refill 1kg Black - Filament
eSUN PLA+Refill 1kg Black
499,-
In stock > 10 pcs
9 colors
Order by midnight, get it at the AlzaBox in the morning.
Info
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed:...
Creality Soleyin Ultra PLA 1kg White - Filament
Creality Soleyin Ultra PLA 1kg White
399,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Filament - made from PLA, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 300mm/s
Sunlu AMS Heater - 3D Printer Accessory
Sunlu AMS Heater
2,990,-
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
3D Printer Accessory - simultaneous drying and printing, even heating up to 70 °C within 20 minutes, intelligent humidity and temperature control, Support for stacked printing up...
Cricut Maker 4 - Cutting plotter
Cricut Maker 4
11,390,-
From 262,- per month
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Cutting plotter – cuts 300+ materials (including leather, wood, substances), Cutting width up to 29.7 cm, project length up to approx. 3.6 m with Smart Materials, 2x faster than...
Creality CFS-C - 3D Printer Accessory
Creality CFS-C
7,489,-
From 172,- per month
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
3D Printer Accessory - multicolour module, automatic switching of up to 4 filaments, RFID filament management, detection of running and tangled filament, moisture protection with...
Cricut Joy Xtra Starter Bundle - Cutting plotter
Cricut Joy Xtra Starter Bundle
7,190,-
From 165,- per month
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Cutting plotter – cutting width up to 21.6 cm, Print Then Cut (A4), cutting 50+ materials, Smart Materials (without pad, projects up to 1.2 m), Bluetooth, Cricut Design Space app...
Cricut Mug Press Starter Bundle - Heat Press
Cricut Mug Press Starter Bundle
5,690,-
From 131,- per month
In stock > 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Heat Press – transfer press for cups, working range for cups approx. Ø 8,2-8,6 cm, height up to 12 cm, automatic temperature and time control, LED indication, safety base and...
TOOCAA Air Assist Kit - Engraving Machine Accessories
TOOCAA Air Assist Kit
1,690,-
In stock 4 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Engraving Machine Accessories - powerful air flow 0 - 28 l/min, quiet operation 40 dB, laser lens protection, eliminates smoke and dust
Cricut Applicator and Remover Set - Kit
Cricut Applicator and Remover Set
589,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Kit - applicator and tweezers set to extend the life of the cutting mat, roller to firmly press the material to the mat, tweezers with wide tip, ideal for use with Cricut Maker
eSUN Wood 1kg Natural - Filament
eSUN Wood 1kg Natural
569,-
In stock > 10 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Filament - made from PLA wood, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print...
TOOCAA 5-1 Rotary kit - Engraving Machine Accessories
TOOCAA 5-1 Rotary kit
7,690,-
From 177,- per month
In stock 5 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Engraving Machine Accessories - 5-in-1 universal rotary accessory, compatible with a wide range of materials, 180° adjustable module, 3-second elastic quick-release jaws, maximum...
Creality Soleyin Ultra PLA 1kg Greenery - Filament
Creality Soleyin Ultra PLA 1kg Greenery
349,-
In stock 2 pcs
Order by midnight, get it at the AlzaBox in the morning.
Info
Filament - made from PLA, filament diameter: 1.75mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 300mm/s
Previous
24 more...
Other

No longer sold

Home

Try our cookies

Alza.cz a. s., Company identification number 27082440, uses cookies to ensure the functionality of the website and with your consent also to personalisage the content of our website. By clicking on the “I understand“ button, you agree to the use of cookies and the transfer of data regarding the behavior on the website for displaying targeted advertising on social networks and advertising networks on other websites.

More information
I understand Detailed settings Reject everything
P-DC1-WEB12