AlzaErgo Arm D05LB FlexMount
- Cheaper products straight away
- FREE delivery all year round
AlzaErgo Arm D05LB FlexMount
Perfectly adjustable holder for up to 32" monitor and laptop
The AlzaErgo Arm D05LB FlexMount is designed for anyone who works with a laptop and external monitor at the same time. Each arm is independently adjustable, so you can fine-tune the height of your laptop and screen to the optimal viewing angle. High-quality steel construction with a total load capacity of up to 18 kg allows you to mount two 17" to 32" monitors or one monitor (max. 9 kg) and a laptop holder up to 15.6" with a load capacity of 4 kg. It also offers two installation methods - using clamps or grommets through the table top, quick release VESA plates, cable management and of course, everything needed for installation is included.
Two arms
With independent height adjustment for maximum flexibility.
Laptop holder
Includes a 10" to 15.6" laptop holder and weighs up to 4 kg.
Up to 32" monitor
The 9 kg load capacity arm allows you to mount a 17" to 32" monitor.
Perfectly adjustable
You can tilt (+/- 45°), swivel (180°) and rotate (360°) the monitor on the mount.
Quick-release VESA plates
They make it easy to mount and dismount the monitor or laptop holder on the holder arm.
Two mounting methods
The bracket can be installed using a clamp or grommet through the table top.
Cable management
Helps keep cables leading from the monitor and laptop organized.
Mounting kit included
All mounting hardware is included in the package. If mounting through a tabletop, a (cordless) drill is required.Two arms with independent height adjustment
You can mount a 17" to 32" monitor on one arm, which will be very easy to install thanks to the quick-release VESA plate - you attach the separate plate to the monitor first, then attach the whole set to the bracket arm and secure with a screw. In addition, the monitor can be tilted, swiveled and rotated (pivot). The second arm is designed for a 10" to 15.6" laptop. Both arms are independently adjustable and you can adjust their height to suit your needs.
Choose the configuration you need
The perfect flexibility of the holder is also demonstrated by the fact that it allows for several customisation options. The laptop holder is mounted on a quick-release VESA plate and can be removed very easily. Thus, you can also use the second arm of the AlzaErgo Arm D05LB FlexMount to mount a second monitor. Alternatively, you can flip the laptop from the left to the right side.
AlzaErgo Arm D05LB FlexMount offers two mounting methods
You can install this holder in two ways - on the edge of the table using a clamp (plate thickness 10-85 mm), or you can use a grommet through the table (10-40 mm). In addition to a detailed manual, a complete installation kit is included and you won't need anything else to assemble the AlzaErgo Arm D05LB FlexMount. If you decide to mount through a tabletop, you will only need a (cordless) drill. You can see how easy the installation is and the variability options in the videos below.
No more messy cables
Cable management in the form of plastic clips helps keep cables leading from the monitor and laptop organized. The notebook is secured by two jaws, which are rubberized so they do not damage the surface of the device. Monitors with VESA 75×75 and 100×100 mm are supported.
Detailed specifications of the AlzaErgo Arm D05LB FlexMount monitor mount
- For 17" to 32" monitors weighing up to 9 kg
- Also includes a 10" to 15.6" laptop holder with a load capacity of up to 4 kg
- The arms are independently adjustable in height
- Quick-release VESA plate for easy installation of the monitor on the bracket
- Monitor can tilt, swivel and pivot for maximum variability
- Laptop holder can be removed and the arm can be used to attach a second monitor
- Compatible with VESA 75×75 and 100×100 mm
- Two ways of installation - table edge mount (clamp) or grommet through table
- Recommended table thickness: attachment to the table edge (clamp): 10-85 mm / table grommet: 10-40 mm
- Organize cables efficiently with a clever cable attachment system
- In addition to the holder, the package includes a user manual with installation instructions and a complete installation kit
- Material: steel and plastic
- Dimensions: 959 × 319 × 561 mm
- Length of one fully extended arm: 376 mm
- Height of the bracket: 407 mm
- Installation through the tabletop requires the use of a (cordless) drill
Normal installation
Everything needed to assemble the product is included.
AlzaErgo product family
We designed AlzaErgo products to meet the highest standards and help you work and relax in a healthier and more comfortable way. For all AlzaErgo products, we can guarantee a first-class quality of each individual product.
Specifications
Colour
Type
Features
Equipment
| Code: | AEY0862 |
| Warranty: | 36 months |
| Links: | Producer's Website: |
| Manufacturer information |
Alza.cz a.s., Jankovcova 1522/53, 170 00 Praha 7 - Holešovice, +420 225 340 111, [email protected]
Show more
A 36-month / 3-year or 48-month / 4-year warranty refers to the total duration of the warranty from the date of receiving the goods. Compared to standard statutory rights, this gives you an additional 12 months / 1 year or 24 months / 2 years, respectively, to file a claim. 
|