APC Back-UPS 500VA 8 schuko outlets

The APC Back-UPS 500 VA 8 schuko outlets backup power supply uses Off-line topology and provides an apparent power of 500VA and a real power of 300W to power sensitive electronics. The backup time at full load is 2 minutes and 39 seconds, and as the load decreases, the battery runtime increases. This is enough time to safely save your work and shut down your systems. The efficiency at full load reaches 98.8%, while the manufacturer also specifies a value of 80% under the same conditions. A total of eight Schuko-type output sockets are divided so that six of them provide both battery backup and surge protection, while the remaining two only protect against voltage spikes. Its compact, wall-mountable design saves space in the office or at home. A USB port is used for status management and monitoring, extending the functionality of the APC backup power supply.

Battery and protective features

Inside the APC Back-UPS 500 VA backup power supply is a lead-acid battery. The user-replaceable battery (type RBC46) simplifies maintenance at the end of the battery's life. The charging power for the battery is specified at 7W. In addition to battery backup, the power supply protects connected electronics from damage thanks to its integrated surge protection. The device actively communicates its status through audible alarms, which alert you to battery operation, low battery capacity, or an output overload.

Monitoring and management

For advanced management and monitoring, the APC Back-UPS 500 VA backup power supply is equipped with a Type-A USB communication port. The interface is used to connect to a computer and utilise power management software. The LED status indicators on the front panel clearly display key operational information, such as mains power, battery operation, battery replacement needed, or overload indication. The device's operating noise level does not exceed 45dBA, a value corresponding to a quiet office environment.

Connectivity and sockets

The APC Back-UPS 500 VA backup power supply connects to the mains using a fixed cable with a Schuko CEE 7/7P plug. For powering appliances, it offers a total of eight Schuko type (CEE 7/3) sockets, which it divides functionally. Six sockets provide full protection, meaning battery backup along with surge protection. The remaining two sockets serve exclusively as surge protection for devices that do not require battery backup, such as printers or scanners.