APT Digital thermostat with LCD display 6 × 4.5 × 3.1 cm
APT Digital thermostat with LCD display 6 × 4.5 × 3.1 cm
The APT AG676A digital room thermostat is a useful assistant for regulating and maintaining the set temperature by switching connected devices on or off. Two physical buttons are used to conveniently set the desired temperature between -50 and 110 °C, along with a clear LCD display showing the currently selected temperature. The measurement results are then updated approximately twice per second. The thermostat also includes a waterproof probe with a length of 100 cm, which facilitates measurement in wet environments such as terrariums or aquariums. There is also an LED indicating the correct relay connection.
Key Features of the APT AG676A Digital Thermostat with LCD Display
- Room digital thermostat is used to control the temperature in the interior
- The thermostat achieves the set temperature by switching the connected devices on or off
- The required temperature range of -50 to 110 °C is set using two buttons
- The AG676A thermostat is equipped with an LCD display that shows the currently set temperature
- Waterproof probe length of 100 cm allows measurements in wet environments
- LED indicates successful relay connection
- Easy to install and connect (see instructions for diagram)
Technical specifications:
Power supply (input voltage): 230V AC (no additional power supply required)
Maximum load capacity of relay (contacts): 1500 W / 6.5 A
Temperature measurement: -50 to +110 degrees Celsius
Measurement resolution: 0.1 degrees Celsius
Measurement refresh rate: approximately 0.5 seconds
Display: LCD (3 characters)
Cable length with probe: 100 cm
Sensor type: NTC10k
Dimensions (without extension): 6 × 4.5 × 3.1 cm
Mounting hole spacing: 73 mm
Weight: 60 g
Specifications
Type
Features
Temperature regulation
Input voltage
Indicator
Use
Connectivity
| Code: | WSaaa1118 |
| Warranty: | 24 months |
| Manufacturer information |
APTEL Sp. z o.o., ul. Produkcyjna 106B, 15-680 Białystok, [email protected] |