Archive - Car Tools

Car Mechanic Tools - set of extensions for half-shafts and drive shaft hubs, contents of the set 3 pcs HEX Allen wrench 1/2" 14-17-19 mm - length 43 mm, 5 pcs 1/2" sockets, 12...

Car Mechanic Tools - set of tools for adjusting the position of the accessory belt tensioner during belt removal/installation on 1.4 and 1.6 Ford, Citroen, Peugeot, Mazda, Toyota...

Car Mechanic Tools - Shock absorber socket wrench set, 50 pieces

Car Mechanic Tools - tools for installing elastic multi-groove belts (for cars without tensioners)

Car Mechanic Tools - sockets for differential flange crown nuts, Mercedes-Benz gearboxes and axle shafts, Set of 5 contains 70 × 8 mm sockets for gearbox, 70 × 6 mm socket on the...

LED Flashlight - Rechargeable LED workshop lamp, length 320 mm, equipped with main COB-LED 5W + 5 LEDs, lithium cells with a voltage of 3.7 V and a capacity of 2600 mAh, equipped...

LED Flashlight - equipped with 3 COB-LEDs, cable length 180 cm, industrial protection IP54, dimensions after folding: 260 × 230 × 40 mm, voltage 230 V, power 30 + 20 W, COB-LED...

LED Flashlight - suitable for checking the leak tightness of the air conditioning system (UV), magnetic base rotatable 360°, USB charging cable + charger, LED output 620 lumens,...

LED Flashlight - Rechargeable workshop lamp with adjustable 3in1 lamp power, flashlight, POWER BANK, 180° adjustable leg with strong magnet, Light emitted by 5W COB-LED in torch...

Puller - Rear axle puller Toyota YARIS 2005-2011 is used only for pressing bushings on the car

Puller - separator set designed to separate hinge joints and joints from cross arms and strut assemblies using an impact hammer, set of 8 pcs, made of high quality...

Puller - kit for removing rear silentblocks on Ford Mondeo after 2007 and on 4x4 vehicles, the device is used to mount and dismount the bushings without removing the cross member

Puller - press for removal and assembly of front lower control arm pivots Renault Scenic II, Clio III, IV, thread size: 18 mm, length 48 mm, width 48 mm, height 65 mm

Puller - puller for mounting and dismounting wheel bearing and hub for VW ŠKODA AUDI, for diameter 72 mm, Designed for easy removal and precise mounting of the bearing in the hub,...

Puller - puller for mounting and removing wheel bearing and hub, for 90 mm diameter ASTA A-H190, for easy and quick removal and precise mounting of the bearing to the axle hub, for...

Puller - Hub puller FORD FOCUS II, VOLVO V50, set for mounting and dismounting bearings - wheel hubs with diameter 78 mm

Puller - Brake disc puller for removing brake discs in the range of 170-400 mm, for brake discs with a diameter of 170-400 mm, for quick and safe removal of brake discs, mounting...

Puller - two-arm puller, with a lock, reinforced, made of high quality hardened steel with lock, which prevents shoulder extension, designed for disassembly of small bearings e.g....

Puller - forged puller for removing ball pins and ball joints in the range of 35-62 mm, screw for adjusting the working range, stabilizing springs, narrow feet facilitate access to...

Puller - clamp puller for removing hose clamps 8-60 mm, used for steel self-tensioning straps and hose clamps with a diameter of 8-60 mm, particularly useful in small, tight and...

Puller - set of three universal ball stud puller suitable especially for working in tight spaces, the ends of the screws are equipped with a ball, which reduces friction between...

Puller - universal ball stud puller, hydraulic, 39 mm, for MAN trucks, mercedes, SCANIA

Diagnostics - Android and iOS, reading live data

Jack - lever, load capacity of 2000kg, lifting range: 135-335mm, weight: 8,7kg