CATA EMPIRE VD 208050 GrEy / Stainless Steel
CATA EMPIRE VD 208050 GrEy / Stainless Steel
The EMPIRE VD 208050 extractor hood units have an individually balanced turbine. The motors are equipped with resettable thermal fuses (if the motor overloads, it switches off, and once it cools down, it switches back on). The metal sandwich grease filters are dishwasher-safe. It also offers a recirculation mode – the hood is fitted with a carbon odour filter. In this mode, the filtered air is channelled out of the hood through a pipe that runs through the entire cabinet, similar to the extraction mode. However, the pipe does not lead into the wall with an elbow joint, but rather above the cabinet, where it is recommended to finish it with a grille. For cabinet construction, the dimensional drawing and the data provided in it are decisive.
Key features of the EMPIRE VD 208050 cooker hood, grey/stainless steel
- Built-in telescopic cooker hood with a white strip
- Dishwasher-safe metal sandwich grease filters
- 3 speeds
- Energy-saving LED lighting, mechanical slide controls
- Two filters required for recirculation
- Option for both extraction and recirculation modes
Lighting:
LED 2×2W
Noise level Lw:
56–71dB(A)
Motor:
1×102W
Max. extraction rate:
338
Min. height above gas hob:
750mm
Min. height above electric hob:
550mm
Pressure for performance measurement according to EN:
15Pa
Height to the top of the flange:
205mm
Specifications
Kitchen hood energy parameters
Hood type
Design
Hood functions and features
Hood performance
Range hood dimensions and weight
Hood outlets
Hood colour
Hood material
| Code: | CATADG046 |
| Warranty: | 24 months |
| Links: | Product Fiche |
| Manufacturer information |
ČEKO IMPORT a.s., Klášterní 3, 550 01, Broumov, Česká republika, [email protected] 
|