DXRACER DRIFTING pink, fabric

Perfect features and design

The Drifting chair features upholstery in a high-quality, water-resistant fabric that is pleasant, smooth, and soft to the touch. It also includes an adjustable headrest and adjustable lumbar support, which provides ideal support for your spine. Drifting has adjustable multifunctional 3D armrests with a soft surface. You can control them with buttons on the outer side of the armrests and then by moving the armrests themselves. Adjust the height, angle up to 15°, and depth (forwards/backwards). The Drifting gaming chair is designed to meet the demands of discerning PC users, computer gamers, as well as office workers and managers.

TILT rocking mechanism

The backrest tilts backwards and forwards along with the seat. It can only be locked in the basic (upright) position. Control it using the lever on the right side; simply pull it out to the side to activate the function. When you want to stop rocking, return to the upright sitting position. Push the right lever back in, and the rocking will stop. The rocking tension, or rocking force, is adjusted according to your weight. This is controlled by a rotary knob under the seat. The backrest recline, ranging from 90–135 degrees, is controlled by a lever on the right side of the backrest, just like in a car seat. 90° for work, 135° for relaxation. The height is adjusted according to your height and leg length. Ideally, your feet should be flat on the floor most of the time, with your knees bent at an angle of 90–120 degrees. This is controlled by the lever on the right side.

DXRacer is a premium choice for all PC users

The DXRacer DRIFTING gaming chair has a height-adjustable headrest that supports the cervical spine, relaxes the neck, and relieves neck pressure. Thanks to its wide design, it offers plenty of space to support your head and is filled with high-density memory foam. The headrest includes a top-quality gel layer with cooling particles that keep you cool and provide excellent air circulation and breathability. DXRacer gaming chairs are used by gamers all over the world, including top professionals. They are featured at tournaments like LCK, UMG, MLG, and in the Czech Republic also at 4GAMES, the Czech Republic Championship in PC Games, and HITPOINT FINALs. In the Czech Republic, DXRacer collaborates with the eSuba gaming organisation. 

Package contents:
Chair, assembly instructions
Chair controls:
Chair and seat height – lightly press the lever down
Rocking – pull the lever out to the side; to stop rocking, push it back in (locks in the upright position)
Rocking tension – rotary knob to adjust rocking tension
Chair assembly:
After unpacking, insert the castors into the arms of the base (five holes at the bottom of each arm are intended for the castors). Insert the piston into the hole for the piston, having activated it beforehand. Mount the mechanism onto the bottom of the seat (place the seat upside down to make it easier to handle, preferably on a mat or a raised surface like a table). Mount the armrests to the bottom of the seat. Attach the backrest to the seat. Place the seat with the backrest and armrests onto the piston with the base and castors. Check that you have tightened all the screws sufficiently. Done, you can now take a seat.   
Please note:
Not recommended for individuals over 185cm tall.
Technical specification:
Seat height: 44–54cm
Weight: 23kg
Armrests: 3D adjustable
Product height: 122–132cm
Dimensions: 70 × 57cm (W × D)
Base/frame: aluminium
Mechanism: TILT mechanism
Maximum load capacity: 125kg
Castor pin diameter: 11mm
Castor diameter: 75mm
Seat width: 54cm
Material: fabric
Recommended user height: 155–185cm
Package dimensions: 80 × 60 × 37cm