DXRacer PRINCE black, fabric

DXRacer PRINCE black, fabric
DXRacer PRINCE is a modern, timeless, and ergonomic chair designed for the demanding needs of PC users, gamers, office workers, and managers. Its strong internal steel frame makes it stable and robust. The Prince offers adjustable height, armrests, headrest, and lumbar support, as well as a rocking mechanism and a backrest that reclines up to 135°. The chair excels in comfort, safety, and seating ergonomics. The DXRacer chair is certified as safe and reliable according to BIFMA and EN1335 standards. All parts of the chair (such as the armrests, backrest, pistons, castors, etc.) have been meticulously tested to ensure they meet all applicable international standards. The chair weighs 27kg and is delivered flat-packed in a box. Assembly is straightforward. You can easily assemble it yourself using the clear instructions included in the box.
Key features of the DXRacer PRINCE gaming chair, black, fabric
- For user height 155–180cm with a load capacity of up to 120kg
- Suitable for gaming, esports, the office, and student rooms
- Fabric finish, pleasantly soft and comfortable
- Built for long-term sitting (8+ hours)
- Strong internal steel frame and a sturdy five-star nylon base
- Backrest reclines up to 135° for user safety and full back support
- TILT rocking mechanism with locking in the upright position
- Adjustable rocking tension based on user weight
- High-quality gas piston meeting international SGS standards
- Universal polyurethane castors suitable for all floors
- 1D height-adjustable armrests with a soft surface
- Lumbar and headrest cushions
TILT rocking mechanism – recline and height control
The backrest of the DXRacer PRINCE chair tilts back along with the seat. It can only be locked in the basic (upright) position. It is controlled by a lever on the right side; simply pull it outwards to activate the function. The rocking tension, or the force of the rocking motion, is adjusted according to your weight. If you are lighter, you can loosen the tension; if you are heavier, tighten it. This is controlled by a rotary knob under the seat. The height adjustment should be set according to your height and leg length. Ideally, your feet should be flat on the floor most of the time, with your knees bent at a 90–120° angle to allow the lymphatic system to flow freely and prevent your legs from swelling. This is also controlled by the lever on the right side.
Thoughtful design
The DXRacer PRINCE gaming chair offers backrest angle adjustment from 90–135°. This is controlled by a lever on the right side of the backrest. The black plastic 1D armrests provide support for your arms; they are height-adjustable and have a soft surface. They are adjusted using the button on the outer side of the armrests by pulling them up or down. The DXRacer PRINCE gaming chair features a five-star nylon base and universal, sturdy, quiet, and safe polyurethane castors (50mm diameter, 11mm pin).
Head and lumbar cushions
The DXRacer PRINCE gaming chair comes with removable cushions for maximum comfort, neck relaxation, and ergonomic spinal support. The lumbar cushion can be adjusted to various heights by pulling on the straps. The headrest contains a gel layer with cooling particles that provide excellent air circulation and breathability, keeping you comfortable even on hot summer days.
Chair assembly:
After unpacking, insert the castors into the arms of the base (the five holes at the bottom of each arm intended for the castors). Insert the piston into the hole for the piston, after getting it moving first. Mount the mechanism onto the bottom of the seat (place the seat upside down to make it easier to handle, preferably on a mat or a table with a raised surface). Mount the armrests onto the bottom of the seat. Attach the backrest to the seat. Place the assembled seat, backrest and armrests onto the piston with the base and castors. Check that you have tightened all the screws sufficiently. Done, the chair is assembled.
Chair height:
122–132cm
Please note:
The chair has a stated load capacity of 120kg, for which it has been tested and can handle such a load. However, due to its design and particularly the shape of the seat, it is more suitable for users up to 90kg. The reason for this is that the seat would be too narrow for a heavier person. For users above this weight, the manufacturer recommends larger models, such as Drifting, Master or Tank.
Specifications
Construction
Armrests
Castors
Material
Load capacity
Colour
Dimensions and weight
Usage
| Code: | DXRzid0047 |
| Warranty: | 24 months |
| Manufacturer information |
Mercury Star s.r.o., 1. Máje 1162, Rožnov pod Radhoštěm, 75662, Česká Republika, [email protected], +420601228882 https://app.asana.com/1/5555576762646/task/1213188049008920
|