DXRacer PRINCE black-grey, fabric
DXRacer PRINCE black-grey, fabric
DXRacer PRINCE is a modern, timeless and ergonomic chair, designed for the demanding needs of PC users, gamers, and even office workers and managers. Its strong internal steel frame makes it stable and robust. The Prince offers height, armrest, headrest and lumbar support adjustment, a rocking mechanism and a backrest that reclines up to 135°. This chair excels in comfort, safety and seating ergonomics. The DXRacer chair is certified as safe and reliable according to BIFMA and EN1335 standards. All parts of the chair (such as the armrests, backrest, gas lift, castors, etc.) have been carefully tested to ensure they meet all applicable international standards. The chair weighs 27kg and is delivered disassembled in a box. Assembly is not complicated at all. You can easily assemble it yourself using the clear instructions provided in the box.
Key features of the DXRacer PRINCE gaming chair, black/grey, fabric
- For a height of 155–180cm with a load capacity of up to 120kg
- Suitable for gaming, esports, the office and student rooms
- Fabric finish, feels pleasant and comfortable
- Built for long-term sitting (8+ hours)
- Strong internal steel construction and a sturdy five-arm nylon cross base
- Backrest recline up to 135° for user safety and full back support
- TILT rocking mechanism with locking in the basic position
- Adjustable rocking tension according to user weight
- High-quality gas lift meeting international SGS standards
- Universal polyurethane castors suitable for all floors
- 1D height-adjustable armrests with a soft surface
- Lumbar and headrest cushions
TILT rocking mechanism – tilt and height control
The backrest of the DXRacer PRINCE chair tilts back and forth together with the seat. It can only be locked in the basic (upright) position. Control it with the lever on the right side; simply pull it out to the side to activate the function. The rocking tension, or the force of the rock, is adjusted according to your weight. If you are lighter, you can loosen the tension; if you are heavier, you can tighten it. This is controlled by a rotary knob under the seat. Adjust the height according to your own height and leg length. Ideally, your feet should be flat on the floor for most of the time, with your knees bent at a 90–120° angle to allow the lymphatic system to flow freely and prevent your legs from swelling. This is controlled by the lever on the right side.
Sophisticated construction
The DXRacer PRINCE gaming chair allows you to adjust the backrest recline between 90–135°. This is controlled by a lever on the right side of the backrest. The black plastic 1D armrests provide support for your arms; they are height-adjustable and have a soft surface. Adjust them by pulling up or down using the button on the outside of the armrests. The DXRacer PRINCE gaming chair has a five-arm nylon cross base and universal, sturdy, quiet and safe polyurethane castors (50mm diameter, 11mm pin).
Headrest and lumbar cushions
The DXRacer PRINCE gaming chair has removable cushions for maximum comfort, neck relaxation and ergonomic spine support. The lumbar cushion can be adjusted to different heights by pulling on the straps. The headrest contains a gel layer with cooling particles that provide excellent air circulation and breathability, keeping you comfortable even on hot summer days.
Chair assembly:
After unpacking, insert the castors into the arms of the cross base (the five holes at the bottom of each arm intended for the castors). Insert the gas lift into the hole for the gas lift, after activating it first. Mount the mechanism onto the bottom of the seat (place the seat upside down to make it easier to handle, preferably on a mat or a table with a raised surface). Mount the armrests onto the bottom of the seat. Attach the backrest to the seat. Place the seat with the backrest and armrests onto the gas lift with the cross base and castors. Check that you have tightened all the screws sufficiently. Done, the chair is assembled.
Chair height:
122–132cm
Please note:
The chair has a stated load capacity of 120kg, which it has been tested for and can handle, but due to its design and especially the shape of the seat, it is more suitable for users up to 90kg. This is because the seat would be too narrow for a heavier person. For users above this weight, the manufacturer recommends larger models, such as the Drifting, Master or Tank.
Specifications
Construction
Armrests
Castors
Material
Load capacity
Colour
Dimensions and weight
Usage
| Code: | DXRzid0048 |
| Warranty: | 24 months |
| Manufacturer information |
Mercury Star s.r.o., 1. Máje 1162, Rožnov pod Radhoštěm, 75662, Česká Republika, [email protected], +420601228882 https://app.asana.com/1/5555576762646/task/1213188049008920 
|