Fenix CL28R

Key features of the Fenix CL28R flashlight

Easy to use Fenix LED flashlight

The powerful and compact Fenix CL28R flashlight has two light modes - bright white light and red light. The White Light is infinitely adjustable via a rotary dial, allowing the light temperature to be controlled from 2700 to 6000 K and the output from 10 to 2000 lumens. In Red Light Mode, you can choose to have a continuous red light (9 lumens) or a light that flashes at the same intensity (9 lumens). The red light mode cannot be activated when the white light is on, the white light must first be switched off with the rotary control. If you want to find out the battery capacity of your flashlight, just Short press the orange button to activate the four status LEDs. The number of lit LEDs indicates the approximate level of charge of the flashlight battery Fenix CL28R (20-40%, 40-60%, 60-80%, more than 80%). When the batteries are discharged below 20% capacity, the last status LED will flash.

Fenix CL28R LED flashlight also serves as a power bank

Charging the Fenix CL28R lantern is simply done by removing the rubber cap of the USB connector and plugging in the USB-C cable that leads to your PC or USB mains/car adapter. The status LEDs flash from left to right during charging. When the Fenix CL28R is fully charged, all status LEDs will illuminate. The flashlight battery does not suffer from memory effect, so you can charge it at any time and there is no need to wait for a specific discharge level. Even while charging, you can use the Fenix flashlight without any problems. If you need to acutely charge your small electronics, you can use the Fenix CL28R as a power bank. Simply plug in a USB-C or USB-A cable and connect to the desired device. You can use the light normally even when charging other devices. The Fenix CL28R is easy to place wherever you want thanks to the 360° handle, tripod thread and also thanks to the built-in magnets that are used to attach the flashlight to any magnetic surface.