HemaCut Spray 15 ml II
HemaCut Spray 15 ml II
HemaCut Spray 15 ml II
HemaCut® SPRAY is an innovative medical device in the form of a spray that contains a patented cross-linked TRISS polymer with built-in sterically shielded amines. When applied to the skin, it forms an adhesive, transparent, breathable and waterproof protective covering. This layer has an anti-inflammatory effect, thus positively contributing to the prevention of inflammation and healing of wounds on the skin.
HemaCut® SPRAY is designed for healing superficial skin injuries such as minor skin tears and cracks, burns I. and II. grades, cuts, cuts and lacerations, abrasions, blisters and other superficial injuries of various etiologies.
Instructions for use
Wash the wound under running water and allow to dry or gently pat dry.
On smaller wounds, spray HemaCut® SPRAY from a distance of 1-2 cm so that the spray dispersion is smaller and directed at the wound.
For larger wounds, spray HemaCut® SPRAY from a distance of 4-8 cm, depending on the extent of the wound, so that the spray is applied to as large an area of the wound as possible at once.
Apply the spray with one or two squeezes of the sprayer.
Wait about 10 seconds between each application.
The polymer forms a water-resistant layer that does not mechanically rub off the skin and wound, so application 1 × every 24 hours or 1 × every 12 hours if the wound condition requires it is sufficient.
Just rinse the wound under running water and dry it again before the next application.
Before using the spray, mechanically remove any polymer residue from the atomizer with your fingernail or finger so that it does not impede the spray.
Ingredients
ZP HemaCut® SPRAY contains a cross-linked TRISS polymer with built-in sterically shielded amines and hexamethylene disiloxane. HemaCut® SPRAY has a unique patented polymer network structure with the ability to scavenge reactive oxygen compounds from the wound. After application to the skin and evaporation of the liquid component, it immediately forms an adhesive film that closely follows the surface of the wound. In addition to promoting healing, this film also serves as a protection against contamination of the wound by microorganisms and mechanical impurities from the outside. It dries on the wound, does not remain sticky and thanks to this, dirt does not stick to it and it is not necessary to cover the wound with a bandage or plaster. The film is transparent throughout the healing process, ensuring easy monitoring of the wound condition. The composition of ZP HemaCut® SPRAY is protected by a Czech patent.
Notice
In the event of side effects (increased soreness, redness, allergic reactions, etc. ), discontinue treatment and contact the treating physician. For external use only. Do not use internally! Do not use after the expiration date on the bottle. Return unused or expired product to the pharmacy. Use in children, pregnant and nursing women is recommended after consultation with a physician or pharmacist. Apply the product on the wound for a maximum of 30 days. Consult a physician for use longer than 30 days. Shake before use. After use, the product may dry on the spray nozzle. If this happens, remove the dried product from the nozzle with a mechanical finger or fingernail. Keep out of reach of children.
ATTENTION, HIGHLY FLAMMABLE LIQUID AND VAPOURS! The liquid form of the product is highly flammable until completely dry. Do not use near open flames and sources of ignition. Use in well-ventilated rooms. Keep out of reach of children. WARNING, the product contains a flammable substance.
Storage
Store at 15-25 °C.
Specifications
Form
Packaging
Administration
Storage temperature
Medical device
Product characteristics
The composition of ZP HemaCut® SPRAY is protected by a Czech patent. '>
| Code: | SPToth1119 |
| Warranty: | 24 months |
| Links: | Product Fiche |
| Manufacturer information |
Targa Team a.s., Šlikova 287/20, 169 00 Praha 6 - Břevnov, CZ, 601523107, [email protected], www.targateam.cz |