Asist 03-8901

Do you own some of the handy Asist micro brushes?  If so, you could use this practical set of accessories. The set contains 278 pieces of high-quality parts not only for DIY but mainly for modellers. These tools are suitable for all art or decoration, engraving and even glass grinding. Due to their compact dimensions, they do not take up space and are nicely stored in a practical plastic case. The kit is recommended for use with Asist AE3C13DN-BMC or AE3C13DN-210

Package Contents:
9× Abrasive tape 1/2" × 1/2", grain size 80
9× Abrasive tape 1/2" × 1/2", grain size 120
9× Abrasive tape 1/4" × 1/2", grain size 80
9× Abrasive tape 1/4" × 1/2", grain size 120
8× Abrasive tape 3/8" × 1/2", grain size 80
8× Abrasive tape 3/8" × 1/2", grain size 120
2× 1" polishing discs
6× 1" polishing discs
1× polishing disc 3/8"
2× rubber 7/8" × 3.2 mm
1× 1/2" × 1/2" sanding cylinder, 1/8" nickel-plated, length 38mm
1× 1/4" × 1/2" sanding roller, 1/8" Nickel shank, length 38mm
1 × 3/8" × 1/2" sanding roller, 1/8" Nickel shank, length 38mm
1 × 3/32 " × 3/8" diamond roller, 1/8" Nickel shank, length 45mm
1× diamond cutter 11/64", 1/8" Nickel shank, length 45 mm
1× diamond tip 1/8" × 7/32", 1/8" Nickel shank, length 45mm
1× diamond tip, 1/8" Nickel shank, length 45mm
1× diamond tip, 1/8" Nickel shank, length 45mm
1× diamond tip 5/64 ", 1/8" Nickel shank, length 45mm
1× diamond tip 1/16" × 3/8", 1/8" Nickel shank, length 45mm
1× diamond tip, cylindrical, 2mm (diameter) × 10mm (height), length: 45mm, shank 1/8"
1× diamond tip, cylindrical, 3mm (diameter) × 10mm (height), length: 45mm, shank 1/8"
1× diamond tip, cylindrical, 3mm (diameter) × 10mm (height), length: 45mm, shank 1/8"
1× diamond tip, inverted cone, 3mm (diameter) × 5mm (height), length: 45mm, shank 1/8"
1× diamond tip, triangle, 4mm, length: 45mm, shank 1/8"
2× Diamond blade 7/8", 8 holes
3× HSS drill 1/8" × 38mm
3× HSS drill 3/32" × 38mm
3× HSS drill 1/16" × 38mm
1× Nickel-chuck 1/8"
1× Nickel Collets 3/32"
1× Nickel Collets 1/16"
2× cylindrical grinding wheel (Red iron oxide), 5/8" × 3/8" (roughness 120), 1/8" Nickel plunger
2× cylindrical grit (Red iron oxide), 3/8" × 1/2" (roughness 120), alumina, 1/8" nickel plated
2× cylindrical grit (Red iron oxide), 3/8" × 3/4" (roughness 120), alumina, 1/8" Nickel shank
2× cylindrical grinder (green) 1" × 3/16" (120 grain), Carborundum, 1/8" Nickel-plated shaft
2× cylindrical blade (green), 13/32" × 1/8" (roughness 120), Carborundum, 1/8" Nickel shank
1× nylon brush 3/4", 1/8" Nickel shank, length 43mm
1× nylon brush 5/8", 1/8" Nickel shank, length 43mm
1× nylon and brush 3/16", 1/8" Nickel shank, length 43mm
1× carbon brush 3/4", 1/8" Nickel shank, length 43mm
1× carbon brush 5/8", 1/8" Nickel shank, length 43mm
1× carbon brush 3/16", 1/8" Nickel shank, length 43mm
1× brush 3/4", 1/8" Nickel shank, length 43mm
6× grinding wheels, 3/4" × 3.6-3.7mm, 220 grain size
6× carbide grinding wheels, 3/4" × 3.6-3.7mm, 180 grain size
6 × white grinding wheels, 3/4" × 3.6-3.7mm
2× rubber tip 1/8" nickel plated
2× rubber tip 1/8" nickel plated
2× rubber tip 1/8" nickel plated
40× 3/4" sandpaper
40× 3/4" PSA sanding paper
36× cutting discs 15/16" × 1/64"
1x polishing paste
1× Carbide stone 1" × 3/8", 60 grain
1× pin for grinding wheels, 3/32", 1/8" Nickel shank, length 40mm
1× spike for sanding paper, 1/16", 1/8" Nickel shank, length 38mm
1x pin for fixed, 1/8" nickel shank, length 38mm
1× small key
1× key
16× 1-1/4" × 0.045" glass fibre cutting discs
2× reel, 1-1/4" × 3/8" 1/8" shank, 80 grain
2× disc, 15mm × 15mm 1/8" shank, 80 grain size
1x pin for PSA sanding paper