Archive - Construction Site Equipment

Mixer - two-speed, 1600W input, stirrer thread size M14, stirrer diameter 140mm, stirrer length 600mm, weight 4.5kg

Vice rotating, jaw opening: 150mm, jaw width: 150mm

Screwdriver Set of CrV, flat (5x75, 6x100, 8x150mm) and cross (1x75, 2x100, 3x150mm)

Socket Wrench Set of CrV steel

Socket Wrench Set

Vice rotating,jaw opening: , jaw width: 150mm

Vice rotating,jaw opening: , jaw width: 125mm

Vice rotating,jaw opening: , jaw width: 100mm

Hammer Drill - power consumption 850W, idle speed 0-2800/min, number of strokes 0-44800/min, max 25mm drill for wood, max 13mm drill bit for masonry, max 13mm drill bit for steel,...

Hammer Drill -power consumption 850W, idle speed 0-2800/min, number of hammers 0-27000/min, drill bit max. 13mm, max. drilling in wood 25mm, max 13mm drilling, max 13mm drilling,...

Belt Sander - power input, belt, idle speed 120-360m/min, abrasive belt 533 x 75mm, abrasive area 170 x 75mm, weight 3.5kg

Double Disc Sander power, wheel diameter 150x12.7x 20mm, weight 9kg

Folding Ladder - aluminium, maximum height: 149cm, load capacity: 150kg, weight: 7.1kg

Angle Grinder with power of 900W, disc diameter: 125mm, max speed: 11000 rev/min, additional handle, weight: 1,7 kg

Angle Grinder power input, wheel diameter 115mm, spindle M14, idle speed 11000 / min, handle M8 thread, weight 1.6kg

Angle Grinder power consumption, wheel diameter 230mm, M14 spindle thread, idle speed 6000 / min, handle M14 thread, weight 6.0kg

Straight Grinder - Li-ion, 3.6V, 1300mAh

Cordless Screwdriver 3,6 V, 1,3 Ah, max. spinning moment 3 Nm

Cordless Screwdriver - Li-ion, 3.6V, 1300mAh, idle speed 180/min, L/P run, tool carrier 1/4" hexagon, max. Torque 4Nm, battery charging approx 4-5h, weight with battery: 370g

Ladder - aluminium, 14 rungs, 3.95m working height, 3.93m folded length, weight: 6.2kg, maximum load: 150kg

Ladder - aluminium, 12 rungs, 3.18m working height, 3.18m folded length, weight: 5.3kg, maximum load: 150kg

Drill - 680 W, with hammer, speed up to 2800 RPM, maximum torque: 10,8 Nm, motor type: carbon, maximum chuck size: 13mm, weight: 2kg

Router Power Tool power 2300W, idle speed 9-22000 / min, shaft clamping 12mm, depth adjustment 0.1mm, weight 6.1kg

Rotary Hammer - with pneumatic hammering, power input 800 W, chuck SDS Plus, 1200 RPM rated speed, 4600 impact rate per minute, impact energy 2,4 J, weight 2,8 kg