Archive - Cordless Power Tools

Car Polisher , max. speed: 1400rev/min, sanding plate diameter: 77mm

Grass Shears - 3,6 V, blade length 12cm, operating time up to 40 min, weight 1200g

LED Reflector -, battery lasts

Chainsaw - battery, carbonless motor, power 1.5 kW, 30.4 cm bar length, cut length 30.4 cm, chain with 45 link, guide rail groove width 1.3 mm, chain pitch 3/8", cutting depth 304...

Snowblower - single-stage accu, suitable Li-ion battery 20 V, 4 Ah, chassis input 30 × 15 cm, weight 4,15 kg, adjustable throw angle -35° to 35°, maximum throw 6 m, battery and...

Jigsaw - AKU, 2500 oscillations per minute, with a maximum cutting depth of 70 mm, changing the blade without tools, adjustable cutting angle and adjustable speed, weight 1.6 kg, 3...

Grass Shears -

Hedge Shears - Accu, two-sided, length 510 mm, bar length 510 mm, maximum cutting diameter 16 mm, blade pitch 16 mm, swivel handle, weight 2800 g, safety fuse, without battery

Cordless Drill

Pruning Shears - single-bladed, max. cutting diameter 37 mm

Pruning Shears - single-bladed, max. cutting diameter 25 mm

Angle Grinder - cordless, disc diameter 125 mm, max. speed 8000 rev/min, additional handle, requires battery with 20 V voltage, weight 1.6 kg, service key and protective cover...

Cordless Drill with hammer, 20 V, maximum torque: 30 Nm, chuck range: 10 mm, with carrying case

Cordless Drill without hammer, 20 V, maximum torque: 40 Nm, chuck range: 13 mm, without battery

Cordless Drill without hammer, 20 V, maximum torque: 30 Nm, chuck range: 10 mm, without battery

Impact Wrench aku, mounting type: hexagon socket 1/4", 2800 rev/min, 100 Nm torque

Compact Chainsaw - cutting speed 8 m/s, length of cut 10 cm, length of the bar 10 cm, chain pitch 0.325", guide rail groove width 1.1 mm, on 12 V Li-Ion battery (not included),...

Circular Saw - battery power,, no-load speed: 5000 rev/min, cutting depth up to 70mm, saw blade diameter: 30mm, transport case included in the package

Cordless Screwdriver 20 V, 1,5 Ah

Circular Saw - cordless, manual, suitable for wood and metal, up to 4700 rev/min, max. cutting depth at 90° 55 mm, 50° cutting angle, features: ergonomic handle, dust extraction...

Impact Wrench aku, mounting type: impact joint 1/2", 2900 rev/min, 300 Nm torque

SDS-Plus Rotary Hammer Drill - with pneumatic hammering, chuck SDS Plus, 900 rev/min rated speed, 5000 impact rate per minute, impact energy 1,2 J, weight 1,53 kg

Cordless Drill without hammer, 18 V, maximum torque: 140 Nm, motor type: carbonless, chuck range: 13 mm

Angle Grinder - cordless, disc diameter 125 mm, max. speed 8500 rev/min, additional handle and antivibration handle, requires battery with a battery capacity 4 Ah and 20 V...