Den Braven FX Tile Adhesive Quartz 25kg C2
Den Braven FX Tile Adhesive Quartz 25kg C2
FX Den Braven tile adhesive works as a thin-layer cement-based adhesive mortar. It is water- and frost-resistant and thus suitable for indoor and outdoor use. Quartz adhesive excels in high adhesion and tensile strength. Suitable for bonding natural and artificial stone tiles. It is used for fixing plates with non-constant thickness. It can be used for bonding small ceramic shards and large format plates. Thanks to FX Den Braven Quartz, you can bond tiles to plaster, concrete, aerated concrete or unplastered masonry. It is suitable for use in laying tiles for underfloor heating, for waterproofing coatings or for bonding polystyrene insulation or mineral wool boards. The adhesive can also be used when trowelling boards using a reinforcing grid.
Key Features of Den Braven FX Quartz C2 Adhesive
- FX Den Braven tile adhesive works as a thin-layer adhesive mortar
- It is water and frost resistant
- Suitable for exterior and interior
- It is characterized by high adhesion and tensile strength
- Suitable for laying tiles in underfloor heating or for waterproofing
- Quartz C2 adhesive can also be used for the installation of mineral wool and polystyrene in facades and wall trowelling
Weight:
25 kg
Consumption:
2,5 kg/m2 at a thickness of 3 mm
4.0 - 6.2 kg/m2 at a thickness of 6 mm
Restrictions:
Not suitable for bonding at temperatures below 5 °C and in direct sunlight. Quartz C2 adhesive is not suitable for bonding to plastic, metal or wood-based substrates. Direct bonding to electrically heated mats is not recommended. It can only be used for heated floors with a gradual temperature rise.
Specifications
Features
| Code: | DENBRA052 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Den Braven, Úvalno 353, 793 91 Úvalno, [email protected], https://denbraven.cz/ 
|