Dogtrace Invisible fence d-fence 2002
Price Guarantee
Installment calculator
4,9%
interest
from 120,- monthly
Dogtrace Invisible fence d-fence 2002
The invisible fence Dogtrace d-fence 2002 allows you to easily define the boundaries of the area in which the dog can move. It is also suitable for installation in places where a conventional fence cannot be used. It consists of a transmitting generator, a receiver and an antenna in the form of an insulated wire. The transmitting generator generates a signal to the antenna wire, which you use to set the boundaries of the warning and correction zones. The receiver, which is attached to the dog's collar, senses the signal from the antenna wire. If the dog crosses the boundary of the first alert band, the receiver will start to emit an intermittent sound signal. If the dog does not respond to the audible warning and crosses the boundary of the second band, the receiver triggers an audible signal and a correction pulse, which the dog perceives as a very unpleasant sensation on the neck. You can easily adjust the intensity of the correction pulse as well as the width of the correction and warning zones.
Key features of the Dogtrace d-fence 2002
- The invisible fence allows you to easily define the boundaries of the area in which the dog can move
- It consists of a transmitting generator, a receiver and an antenna in the form of an insulated wire
- The transmitting generator generates a signal to the antenna wire, which is used to establish the boundaries of the warning and correction zones
- The receiver, which is attached to the dog's collar, senses the signal from the antenna wire
- If the dog crosses the boundary of the first alert band, the receiver starts to emit an intermittent sound signal, if it crosses the boundary of the second band, the receiver triggers an audible signal and a correction pulse at the same time
- The Dogtrace d-fence 2002 can be used in any terrain
- Easy and quick to install
- It can also be used to supplement an existing fence that the dog jumps over, chews through or burrows under
- The collar is 100% waterproof and suitable for all dog breeds
- The collar circumference can be adjusted from 15 to 72 cm and the intensity of the correction pulse in 8 stages
- Transmitting generator can be set for short and long antenna wire installation
- Allows switching of the power generated to the antenna wire
- Includes a backup battery that can supply power to the transmitting generator for up to 16 hours
The Dogtrace d-fence 2002 can be used in any terrain
The Dogtrace d-fence 2002 can be used in any terrain. For the invisible fence to work, the wire must be connected to the transmitter and the wire loop must not be intermittent. From the transmitter, unwind the wire around your property, whichcan be laid on the ground, shallowly buried or attached to a fence or wall. The package contains 100 m of antenna wire with a cross section of 0.75 mm2. When you wrap the outgoing wire around the incoming wire, the twisting of the wires around each other will cause interference to the emitted waves and the dog will be able to move freely through the area.
The Dogtrace d-fence 2002 invisible fence is quick and easy to install
The Dogtrace d-fence 2002 is easy and quick to install. If necessary, you can change the fencing at any time. The fence is invisible, so it will not interfere with the view of the surroundings or aesthetically disturb the garden. It can also be used to supplement an existing fence that the dog jumps, chews or burrows through. For an installation length of 400 m, a wire with a cross section of 0.75 mm2 is ideal, at 400-600 m with a cross section of 1 mm2, for 600-900 m use wire with a cross-section of 1.5 mm2 and for 900-2200 m use wire with a cross-section of 2.5 mm2. Also included is a backup battery that serves as a backup power supply in the event of a mains power failure. It can supply voltage to the transmitting generator for up to 16 hours.
Transmitting generator offers 2 bands
The electronic systems of the generator and the collar use modern technology based on single-chip microprocessors. The transmitting generator offers 2 bands. The first is warning and continuously adjustable from 0-15 m, while the second is correction and can also be continuously adjusted to 0-15 m. The generator can be configured for short and long antenna wire installation. It allows switching the power that is generated into the antenna wire. You can set the warning and correction zone for short installations up to 400 m and long installations over 400 m. OThe buoy is lightweight, compact and 100% waterproof. It is suitable for all breeds of dogs. It is powered by a CR2 lithium battery that will keep it running for up to 6 months in standby mode. You can adjust the circumference from 15 to 72 cm and the intensity of the correction pulse in 8 steps. The collar has an ISIT function that allows to identify the presence and intensity of interfering signals in places where you would like to install the antenna wire and avoids possible problems with the optimal function of the invisible fence Dogtrace d-fence 2002.
Package contents:
1× transmitting generator
1× receiver with woven belt
1× wire with a length of 100 m and a cross section of 0.75 mm2
2× contact point 12 mm
2× contact point 17 mm
1× CR2 3 V lithium battery
1× 9.6 V backup battery
1× magnet with lanyard
1× power adapter
1× test gout bottle
1× antenna connector
2× notch connector for connecting wires
2× plastic dowel for mounting the transmitter generator on the wall
2× screw for mounting the transmitting generator on the wall
Specifications
Type
Usage
Power Supply
Technical specification
Features
Dimensions
Packaging
| Code: | CHPob130 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
VNT electronics s.r.o., Dvorská 605, 563 01 Lanškroun, Česká republika, www.dogtrace.com, www.doggpsmini.cz, www.vnte.cz 
|