PATTEX One for all Universal 80 ml

PATTEX One For All UNIVERSAL is a flexible mounting adhesive and sealant for interior and exterior use with a FlexTec formula. It is characterised by its high final strength and joint elasticity. Once cured, the joint is paintable, sandable and resistant to UV radiation, heat and vibration. The adhesive is designed for bonding and sealing most absorbent and non-absorbent materials, such as brick, ceramic, concrete, fibreboard and chipboard, plasterboard, plywood, natural stone (min. thickness 10mm), MDF, wood, metal, rigid PVC, polystyrene, glass, plastics and painted surfaces.

Instructions for use:
The surface to be bonded must be clean, dry and completely free of grease. When using a cartridge, cut off the tip of the cartridge above the screw thread, screw on the plastic nozzle and cut it at an angle. Then insert the cartridge into the gun. Apply the adhesive to one of the surfaces:
1. In dots, to smooth out uneven surfaces
2. In a wavy line for higher initial adhesion
3. For wider surfaces, or in straight lines for smaller surfaces
4. For outdoor use, apply vertical strands.
Remove any adhesive residue immediately with a damp cloth. Cured material can only be removed mechanically.
Volume:
80ml
Warning:
Not suitable for bonding materials such as PE, PP, PTFE, acrylic glass, copper, brass and plasticised PVC. This adhesive is not suitable for materials that are permanently submerged in water.