PPG Primalex thin-layer glaze 3in1 chestnut, 0,75 l
PPG Primalex thin-layer glaze 3in1 chestnut, 0,75 l
Primalex 3in1 is designed for protective and decorative coatings of exterior wooden surfaces. It combines impregnation, a primer and a final glaze, eliminating the need to buy and apply multiple separate products. It provides the wood with protection against UV radiation, mould, rot and wood-boring insects. Thanks to its thin-layer formulation, it preserves the natural grain of the wood and gives the surface a matt finish in a chestnut shade.
Key features of Primalex 3in1 thin-layer glaze, chestnut
- Designed for exterior use
- Suitable for fences, pergolas, cladding, windows and doors
- Solvent-based formulation
- Protects against UV radiation, mould, rot and pests
- Dries to a matt finish
- Two coats recommended
- Theoretical coverage of 15m²/L
- Drying time of approximately 12 hours before the next coat
- Pack size of 0.75L
Application and properties
Apply two coats of the glaze using a brush. Apply to a clean and dry surface. The drying time before applying the next coat is approximately 12 hours. One litre covers approximately 15m² in a single coat, but actual coverage depends on the absorbency and type of wood. Thanks to deep penetration, the coating does not peel or crack. This makes future maintenance possible without sanding.
Specifications
Type
Colour
Technical parameters
Features
Packaging
| Code: | PPGlaz039 |
| Warranty: | 24 months |
| Manufacturer information |
PPG Deco Czech a.s., Břasy 223, 338 24 Břasy, 800 101 000, [email protected] 
|