PWS Flaker 10 l

A flocculator is a PWS brand pool chemical that will help you keep the water in your pool clean. The impurities will bind into flakes which, when filtered, will produce beautifully clear water. It is used to remove turbidity from pool water. Some particles are aggregated by the flocculator into such large units that they settle to the bottom during the cleaning process even when the sand filtration is switched on. Organic substances that are not desired in the pool water are also absorbed on the sludge flakes formed and leave the pool water with the sludge.

Use:
Check the pH value, which should be between 6.8 and 7.2. This range of pH values guarantees the optimum effect of the flocculator. Measure out the calculated dose of the product in a plastic container and mix it in 3 to 5 litres of water. Apply the floc solution evenly over the entire pool surface with the filtration on.
Dosing:
50-150 ml per 10 m³ of pool water

Warning:
After using the flocculator it is necessary to thoroughly wash the sand filtration. If you do not wash the filter sufficiently, the precipitate from the filter will be released back into the pool water. Always read the label and product information before use.