Archive - Saw Blades

- AIZ 20 AT, for the cutting of hardened screws and nails, cutting of stainless steel/stainless steel, immersion cuts into highly abrasive materials (eg fibreglass, plasterboard,...

HCS PAIZ 32 EPC, submerged cut into softwood, cutting holes in furniture, alignment of wooden parts, for PMF 350 CES, 32x62mm

PAIZ 32 AT, hardened screw and nail cutting, Inox / stainless steel cutting, submerged cuts in highly abrasive materials, for PMF 350 CES, 32x50mm

- With carbide grain RIFF AVZ 32 RT10, fine grinding, wood grinding in narrow interstices, sanding parquet in hard-to-reach places, wood-plastic-composite and epoxy, 32 x 50mm

for fine finishes on non-ferrous profiles, in wood, submerged cuts into gypsum boards, 10x20mm

for submerged cuts into gypsum boards, copper pipe alignment, 20x30mm

- 1 pc(s) saw plate for reciprocating saws, for wood, 12,1 × 5,2cm

HCS AIZ 32 BSPC, hard wood, precision cutting of furniture holes, cutting of wooden panels, 32x50mm

Saw Blade - 1 pc(s) saw plate for reciprocating saws, for plastic, metal and wood, 50 × 3,2cm

- BIM AII 65 BSPB, cuts into boards with surface layer or hardwood boards, cutting holes in furniture, aligning wooden parts, 40 x 65mm

HCS ATZ 52 SFC, flexible, carbon steel scraper, flexible, removing soft residues of carpet adhesives, removal of residual colours, removal of silicone joints, 52x38mm

With carbide grains RIFF AVZ 32 RT4, coarse grinding, grinding of paint in narrow interstices, grinding of parquet varnishes in hard-to-reach places, wood-plastic-composite and...

- AIZ 32 AT, cuts hardened screws and nails, cuts inox/stainless steel, plunge cuts into highly abrasive materials (e.g. fiberglass, plasterboard, cement bonded fibre boards,...

AIZ 28 SC HCS, soft expansion joints, cutting of glazing putty, cutting of insulating materials (eg Flumroc steel wool), 28x40mm

Saw Blade AVZ 70 RT4, carbide with carbide grain RIFF, 3 max, grooving of tile and tile removal of mortar or tile adhesives, removal of joints in the smallest corners using a tip,...

Saw Blade Set - for linear saws, for wood and plastic, 4mm pitch, 105mm long, 5pcs

Saw Blade Set - for linear saws, designed for softwood curves and insulating materials, tooth spacing: 2mm, length: 50mm, 5pcs

Saw Blade Set - saw blades for jigsaws, bimetallic, intended for steel, aluminium, non-ferrous metals and stainless steel, tooth pitch 1.2mm, length 55mm, 5pcs

Saw Blade Set - for straight saws, for wood and plastic, tooth pitch 2.5mm, length 105mm, 5pcs

Saw Blade Set - for straight saws, for wood, tooth pitch: 4mm, length: 75mm, 5pcs

Saw Blade Set - for jigsaws, designed for wood and plastic, tooth pitch: 4mm, length: 75mm, 5pcs

Saw Blade Set - for linear saws, for wood and plastic, tooth spacing 2.5mm, length 75mm, 5pcs

jigsaws for metal 11-13 TPI

for metal, T-stop, 5pcs