Sparkly POOL Sediment remover - pool cleaner 3 l

Amazing Deal 449,- Save 550,-

Sparkly POOL Sediment remover - pool cleaner 3 l

Sparkly POOL sediment remover is a highly effective liquid product designed to remove even years of sediment from the pool, which is caused mainly by increased content of calcium and magnesium salts (limescale), as well as increased iron and manganese in the water used to fill the pool, whether well water or tap water. The active substance of this product ensures the dissolution of sediments of any mineral origin, to which impurities attach, which subsequently promote the growth of algae and bacteria. The dissolution of sediment that will also occur throughout the circulation pipes and filter unit of your pool will cause the water to become cloudy. Therefore, it is recommended to use the product at least 2 months before the swimming season or before winterizing the pool. Water treated with this product shall not be discharged. It softens the water and prevents subsequent scale build-up on the pool walls, in the pipes and in the filter unit.

Swimming pool chemicals Sparkly POOL Sediment remover - pool cleaner 3 l

Key Features of Sparkly POOL Pool Chemistry Sediment Remover - Pool Cleaner, 3 l

  • Highly effective chlorine-free cleaner
  • Suitable for fresh and salt water pools and hot tubs
  • Designed to remove even old deposits from the pool, which are caused mainly by increased content of calcium and magnesium salts (limescale), as well as increased iron and manganese content in the water used to fill the pool, whether well water or tap water
  • Dissolves deposits also throughout the circulation pipe and filter unit

Use:
1. Before applying the product, first check the pH value with an appropriate tester (Sparkly POOL), adjust the pH value of the pool water to 6.8–⁠⁠⁠⁠⁠⁠7.2 using pH PLUS or pH MINUS products (e.g. from the Sparkly POOL series).
2. Dilute the required amount of the product in a plastic container with water (5
–⁠⁠⁠⁠⁠⁠10 l) and apply it evenly (pour) into the water along the edge and around the perimeter of the pool, or slowly pour it directly into the skimmer of your pool. THE PRODUCT IS ADDED TO THE WATER, NEVER THE OTHER WAY AROUND.
3. Switch on the filtering device to ensure perfect mixing of the product in the pool for at least 6 hours (perfect mixing depends on the performance of your filtering device and the volume of water). No one must be present in the pool at the time of application and during the mixing period.
4. It is absolutely necessary to leave the filtration equipment running for at least 30 minutes a day for 2
–⁠⁠⁠⁠⁠⁠4 weeks.
5. After this time, it is recommended to use a FLOODER, FLOODER EXTRA or PROJASTER EXTRA (from the Sparkly POOL range), which removes the turbidity caused by this product and floats it to the bottom of the pool, from which it must be sucked out of the pool circulation system, i.e. into the garbage. Your pool will be like new again and the water will be sparkling and crystal clear.

Dosage:

Apply 150
–⁠⁠⁠⁠⁠⁠200 ml of product for every 1 m³ (1000 l) of the pool water volume. Use this product safely. Always read the information on the packaging before use.
Note:
Do not mix or use with other products, especially strong oxidizing agents and strong bases. The product may only be used for water treatment in swimming pools. The manufacturer is not liable for any damage caused by improper use of the product.

DESCRIPTION OF FIRST AID:
WHEN INHALED:

Interrupt exposure, transport the victim to fresh air. If nausea persists, arrange for medical attention.
When in contact with the skin:
Remove contaminated clothing, shoes and wash thoroughly with water (preferably lukewarm) and soap. Do not use solvents or thinners. If the trouble persists, seek medical attention.
FOR CONTACT WITH THE EYE:
Rinse with a gentle stream of water for at least 15 minutes. Keep the eyelids wide open with your thumb and forefinger. If the affected person wears contact lenses, remove them before flushing the eyes if this is easy. Seek professional medical treatment.
FOR FOOD:
Rinse your mouth and drink plenty of water. Do not induce vomiting. Do not serve milk or alcoholic beverages. Never give anything by mouth to an unconscious person. Seek medical attention.
LIKVIDATION:
Remove according to applicable Czech and local regulations (e.g. in a hazardous waste incinerator). Never dispose of by flushing down the drain. Do not contaminate standing or running water with chemicals or used containers. Pass residual quantities and unreclaimed solutions to a certified disposal company. The waste generator is responsible for waste classification and disposal.
DANGER NOTICE:
SIGNAL WORD:

Danger.
STANDARD SAFETY KNOWLEDGE:
May be corrosive to metals. Causes serious eye damage.
SAFE HANDLING GUIDELINES:
Keep out of reach of children. Keep only in the original packaging. Wear protective gloves/protective clothing/goggles/face shield. Dispose of the contents/packaging by handing it over to an authorised person or by taking it to the hazardous waste section of the collection yard.
TOXICOLOGICAL INFORMATION CENTRE:
Na Bojišti 1, 128 08 Prague 2. Tel.: +420 224 919 293, +420 224 915 402 (24 hours/day)

Specifications

Features

Function Hardness control, Sediment remover
Suitable for Pools
Volume 3 l

Shape and type

Form Liquid
Type Chlorine-free
Code:  PROCH053
Warranty: 24 months
Manufacturer information

ProChem Solutions s.r.o., 9. května 632, Plumlov 798 03, Czech Republic, +420 588 002 000, [email protected]

Show more