Archive - Construction Site Equipment

Compact Chainsaw - cutting speed 8 m/s, length of cut 10 cm, length of the bar 10 cm, chain pitch 0.325", guide rail groove width 1.1 mm, on 12 V Li-Ion battery (not included),...

Circular Saw - battery power,, no-load speed: 5000 rev/min, cutting depth up to 70mm, saw blade diameter: 30mm, transport case included in the package

Energy Consumption Meter - screen size of the rotating display 4.7 cm, two buttons for easy operation, max. Measured consumption 9999kWh, min. recorded power value 2W, max. 3680W,...

Cordless Screwdriver 20 V, 1,5 Ah

Circular Saw - cordless, manual, suitable for wood and metal, up to 4700 rev/min, max. cutting depth at 90° 55 mm, 50° cutting angle, features: ergonomic handle, dust extraction...

Impact Wrench aku, mounting type: impact joint 1/2", 2900 rev/min, 300 Nm torque

SDS-Plus Rotary Hammer Drill - with pneumatic hammering, chuck SDS Plus, 900 rev/min rated speed, 5000 impact rate per minute, impact energy 1,2 J, weight 1,53 kg

Cordless Drill without hammer, 18 V, maximum torque: 140 Nm, motor type: carbonless, chuck range: 13 mm

Accessory Kit

Metre

Metre

Cross Line Laser Level - range 50 m, for indoor and outdoor use, 2 planes, horizontal range 120°, vertical range 120°, levelling accuracy ± 0.2 mm/m, self-levelling capability 3°,...

Cross Line Laser Level - range 50 m, for indoor and outdoor use, levelling accuracy ± 0.2 mm/m, self-levelling capability 3°, green laser colour, ingress protection rating IP54,...

Angle Grinder - cordless, disc diameter 125 mm, max. speed 8500 rev/min, additional handle and antivibration handle, requires battery with a battery capacity 4 Ah and 20 V...

Cordless Tool Charger - for 18V Li-Ion battery, 2 charging slots, maximum charging current 8 A, input voltage 230 V, output voltage 18 V, weight 2368 g

Mixer for construction mixtures - two-metre, with power 1800 W, mixing whisk with diameter 220 mm, weighs 6,4 kg

Floodlight - 18V with tripod and 4000 lm luminous flux

Heat Gun , maximum temperature up to 550 °C, equipment: temperature regulation, air speed control and lcd display

Cooler Box

SDS-Plus Rotary Hammer Drill - chuck SDS Plus, impact energy 3,2 J, weight 3,7 kg

SDS-Plus Rotary Hammer Drill - chuck SDS Plus, 4300 impact rate per minute, impact energy 3,2 J, weight 3,7 kg

Demolition Hammer - power input 2000 W, 1000 impact rate per minute, impact energy 57,7 J

SDS-Plus Rotary Hammer Drill - power input 1500 W, chuck SDS Max, 2950 impact rate per minute, impact energy 12,2 J, weight 9 kg

Demolition Hammer - power input 1500 W, chuck SDS Max, 2100 impact rate per minute, impact energy 18 J, weight 11,6 kg