Archive - Work Tools

Screwdriver Set - set of cross and flat screwdrivers in a practical plastic holder. 6 pcs.

Screwdriver Set - set of the most used screwdrivers. Cross PH2, flat SL6. Length 100mm. Ergonomic rubberized handle.

Screwdriver Set - SW5, 6, 8. PH1, 2, 3. Watchmaking SL 2.5 and 3 and PH0 and 00 and TORX T5, 6, 7 and 8. Screwdriver for bits. Magnetic tips.

Screwdriver Set - PH1, PH2, SL3, SL5, SL6, voltage tester: 100-250V, magnetic tips, VDE, Cr-V 6150, HRC51-54, weight: 663g

Screwdriver Set - flat, cross and watch screwdrivers 17 pcs (SL, PH, TORX), 16 pcs bits (SL, PH, PZ, HEX), 9 pcs socket wrenches 1/4" 4-12mm, CrV

Screwdriver Set - SL 8x150, 6x100, 5x100, 5x75, 6x38mm, PH 3x150, 2x100, 1x100, 1x75, 2x38mm, magnetic tips, anti-slip handle, CrV

Wrench Set - sizes from 6 to 19mm, double-sided, CrV steel, 8pcs

Wrench Set - sizes from 6 to 24mm, double-sided, CrV steel, 12pcs

Pliers set - front splitting pliers 100mm, side splitting pliers 110mm, combined pliers 115mm, semicircular pliers 125mm, Cr-V.

Wrench Set - sizes from 8 to 19mm, double-sided, ratchet, CrV steel, 7pcs

Wrench Set - spanner sizes 8, 9, 10, 11, 13, 17, 19mm, spanner length: 140 - 245mm, 7 pcs in a set, flexible 90° bend, Hoteche

Tool Set - tool set with electric drill 600 W, 101 pcs. Set of bits, combination pliers, screwdrivers, set of drills, tape measure and more.

Hex Key Set - 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10mm, HEX, L-shaped, extra long, with ball, work at an angle of 30°, Cr-V, HRC52, weight: 390g.

Hex Key Set - set of metric and inch Allen keys. 30 pieces stored in a practical box.

Hex Key Set - hexagon, hex, 9 pcs, inch wrenches, Cr-V steel, 367g. Sizes: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8".

Hex Key Set - 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10mm, HEX, L-shaped, extra long, with ball, work at an angle of 25°, S2 steel, weight: 417g.

Hex Key Set - sizes: 2; 2.5; 3; 4; 5; 6; 7; 8mm, Allen key, Cr-V steel, weight: 213g. Pocket design.

Tool Set - set of chisels, punches and punchers, hexagon, CrV.

Pipe Cutter sizes 3/16 "- 5/8", only for copper pipes, do not use on steel!

Impact Wrench aku, mounting type: impact joint 1/2", 2400 RPM, 180 Nm torque

Pipe Cutter - inverter plasma cutter. Working range: 10 - 40 A. Cutting thickness: 0.5 to 7mm.

Pipe Cutter - for pipes with a diameter of 3 - 32mm, cutting depth: 3.5mm, weight: 240g

Pipe Cutter - for pipes with a diameter of 3 - 32mm, max. depth of cut: 3.5mm, weight: 105g

Impact Wrench pneumatic, mounting type: impact joint 1/2", 8000 RPM, working pressure of the tool is 6 bar, 780 Nm torque