Archive - Workshop

Tool Set - for electricians in a durable leatherette case

Screwdriver - screwdriver with bits, screwdriver body is ergonomically rubberised, tightening clamping mechanism, the most commonly used flat, cross, alloy and Torx bits

Screwdriver - ergonomically shaped, ratchet screwdriver with smooth 72-point gear, ergonomically rubberised handle, the most commonly used flat bits, cross, Torx, extension,...

Multimeter - digital, AC voltage, DC voltage, DC current, resistance, diode, transistor, continuity (buzzer), capacity and AC current checking, CAT III measurement category,...

Multimeter - digital, AC voltage, DC voltage, DC current, resistance, temperature, diode, frequency, battery with status indication, continuity (buzzer), capacity and AC current...

Multimeter - digital, measuring AC max. 500V/DC max. 250V, AC/DC current 200mA, resistance 20MOhm

Tool Organiser , panel size 64.6x1.7x38.5cm, 6 trays, 19 hooks

Reel - manual, maximum load 450kg, vertical thrust, rope length 7,3 m, placement: floor and for walls

Tool Set - rolling tool case made of high-quality chrome-vanadium steel, 245 pieces, precision-shaped compartments ensure that tools always remain in place, weight 12.5kg

Caulking Gun - extruding, for the application of cement, adhesives, sealants etc. in the cartridge, includes a reinforced guide for the extruder

Caulking Gun - extruder for the application of mastics, adhesives, chemical anchors in a cartridge, a part of the gun is also a cleaning stick used to remove the dried sealant from...

Caulking Gun - on Teflon PU Foam, is designed for the application of all types of low and high expansion polyurethane foams, the main advantage of the construction of this gun is...

Caulking Gun - for all-metal PU foam, designed for the application of virtually all kinds of low and high expansion polyurethane foams, easy regulation of foam flow

Vice rotating, jaw opening: 70mm, jaw width: 100mm

Vice rotating, jaw opening: 70mm, jaw width: 80mm

Vice jaw opening: 55mm, jaw width: 63mm

Hoist - A 2t lever hoist, pulling force of 4000kg, has 3 wrought hooks with safety fuses and a steel rope with a diameter of 6mm and a length of 3m

Vice jaw opening: 125mm, jaw width: 150mm

Hoist - The 2t rescue lever hoist, the pulling force is 2000kg, it has 3 forged hooks with safety fuses and steel rope with a diameter of 5mm and a length of 1.7m

Vice jaw opening: 115mm, jaw width: 125mm

Tool Set 5-part files, file length 200mm, set includes files of medium roughness, flat, round, triangular, square, round

Vice rotating, jaw opening: 105mm, jaw width: 100mm

Tool Set - 6-piece files in a case, file length 200mm, file set includes medium course flat, half round, triangular, square, round and wire brush

Vice jaw opening: 70mm, jaw width: 80mm