WÜRTH High-Strength Threadlocker DOS, Green, 25g
WÜRTH High-Strength Threadlocker DOS, Green, 25g
Würth High Strength Threadlocker DOS serves as removable screw insurance and sealant for demanding applications - one-handed application. It is suitable for bolted joints subjected to high stress. It achieves 100% sealing, requires no additional parts to secure and protects against friction corrosion and rust. It prevents the separation of e.g. by vibration or impact loads without undesirable seizure problems, such as with mechanical bolt locks. Resists a wide range of alkalis, gases, solvents, oils and fuels. Dosing can be tailored to the specific application thanks to DOS - keeping consumption and costs to a minimum.
Key features of DOS Würth High Strength Threadlocking Adhesive, green, 25 g
- High strength joints - must be heated to > for removal; 250 °C
- Excellent media resistance and thermal stability
- A versatile product with a wide range of applications
- Very durable
- Silicone, solvent and oil free
- DOS system for practical one-handed use thanks to the ingenious swivel lock - one hand always remains free
- Infinitely adjustable DOS dosing system
- No material residue in the dosing neck and cost optimisation thanks to virtually residue-free emptying with DOS
- NSF tests according to NSF/ANSI 61 for use with technical and potable water
Use:
It is used to ensure, fastening and sealing of threaded connections, like screws, cotter pins, nuts, threaded plugs, threaded inserts, ball and roller bearings, which normally no longer need to be disconnected. High strength threadlocker is designed for use in automotive and truck applications, metal and tool manufacturing, shipbuilding, engineering and engine manufacturing, and electrical and electronic equipment manufacturing. Liquid plastic cures on contact with metal without the presence of oxygen. Contact surfaces must be dry and free of dust and grease. Wet the glued surfaces sufficiently and join them immediately.
Technical specifications:
Chemical base: dimethacrylic acid ester
Colour: green fluorescent
Density/Conditions: 1.11 g/cm³ / according to DIN EN ISO 2811-1
Min. /max. viscosity/conditions: 500-900 mPas / at 25 °C, Brookfield RVT, spindle 2/20 rpm /min
Suitable for max. thread: M25
Max. gap filling: 0.15 mm
Min. /max. initial strength: 5-15 min
Min. /max. functional strength: 1-3 h
Min. /max. the ultimate fortress: 3-6 h
Min. /max. shear strength/conditions: 15-30 N/mm² / according to ISO 10123
Min. /max. the moment of detachment: 30-60 Nm
Condition for the breakaway moment: DIN EN 15865
Min. /max. progressive torque: 10-30 Nm
Conditions for progressive torque: DIN EN 15865
Min. /max. processing temperature: 5 to 35 °C
Min. /max. temperature resistance: -55 to 150 °C
Min. flash point: 100 °C
Shelf life from date of manufacture / conditions: 18 months / room temperature
Weight of contents: 25g
Conditions for complete solidification/curing: exclusion of oxygen and metal contact (copper or iron ions)
Warning:
The following plastics may be adversely affected by prolonged exposure to the product: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (luran, Tyril), Vinidur, Vulcanfibre and lacquered surfaces. The instructions for use are recommendations based on the manufacturer's own tests and experience. It is recommended that you perform your own tests before each use. Due to the wide range of possible applications and storage and operating conditions, the manufacturer is not responsible for the result of any given use. The manufacturer's free customer service department provides technical information or actions as an advisory service, it is not responsible for this service. This does not apply where such advice or information is provided in the context of specified, contractually agreed services or where the adviser has acted arbitrarily.
Specifications
Type
Features
Packaging
| Code: | WURhob008 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Würth, spol. s r.o., č.p. 137. Nepřevázka 293 01, +420 323 041 141, [email protected] |