NIKWAX TX. Direct Wash-in 5 l (50 washes)

NIKWAX TX. Direct Wash-in is an impregnation designed for impermeable breathable fabrics. The impregnation increases the water resistance of the material while maintaining its breathability. It is suitable for ballasts, Gore-Tex, Ultrex, SympaTex, PermaTex, Nikwax Analogues, Entrant, eVENT, PTX and other similar materials. It is water-based, non-flammable, non-toxic and carbon dioxide-free. TX impregnation. Direct Wash-in is designed for use in the washing machine and for hand washing.

Instructions for use:
For best results, remove all parts not suitable for washing and wash in NIKWAX Tech Wash first. Before impregnation with NIKWAX TX. Direct Wash-in is not necessary to dry things, but shake them well. Respect the symbols on the specific product. Do not machine wash garments with loose glued seams. After impregnation and drying, they can be glued back together with a special clear adhesive. Do not use detergents.

Washing machine application:
1. Thoroughly remove any detergent residue from the detergent dispenser.
2. Put clean clothes in the washing machine (maximum 2 pieces).
3. Measure out 2 full caps (100 ml) of NIKWAX TX. Direct Wash-in.
4. Set the washing machine to the synthetic programme (30 °C) and select a low speed when wringing.
Application manually:
1. Wear gloves and immerse the garment in a container or basin of water warm enough to hold your hands in.
2. Dispense 2 full caps (100 ml) of NIKWAX TX. Direct Wash-in for one piece of impregnated clothing.
3. Soak well in the bath and leave to soak for about 5-10 minutes and then rinse thoroughly.
4. Use cold water for soaking and keep soaking until it is clean.
Drying:
Allow the garments to dry freely, after a few minutes check for excess impregnation and remove with a damp piece of cloth. If allowed by the manufacturer, tumble dry at a low temperature.