MEVA TP17002

If you need to dry out a building, heat up a garage or other ventilated areas, the MEVA gas heater with adjustable output of 9-30 kW is an efficient tool that serves these purposes perfectly. Thanks to its design, it can not only be used to heat the space as a whole, but you can also direct it to a specific location and make heating or drying even faster. The MEVA heat generator offers many advantages and a good ratio between performance and consumption. You can use a gas heater not only to maintain a certain temperature, but also to heat up and dry out quickly. Thanks to its performance and quality fan, it can provide thermal comfort in a very short time. As soon as you switch on the heater, you can feel the warm air permeating the room. The product is equipped with piezo ignition for easy start-up and a thermal fuse for safe operation. The heater overheat protection and protective grille provide an additional level of safety. The adjustable blowing angle and infinitely variable power control allow you to adapt the heat generator to your actual needs. The heater can be used for impact thawing, drying and tempering of rooms in non-residential buildings (in open or sufficiently ventilated space) such as garages, workshops, warehouses or halls. It cannot be used for heating indoor unventilated spaces or for permanent heating. In the package you will find accessories for connecting the heater to a 5kg and 10kg gas bomb.

Package contains:
Meva TP17002 gas heat generator
1 regulator (fixed operating pressure 1500 mbar, outlet thread)
1 piece connecting hose 1,5 m
Parts and fasteners for assembly
Operating Instructions
Fuel: Gas - propane, butane or mixtures thereof
Electrical power:
80 W
Voltage:
230 V, 50 Hz
Nominal heat input:
8.8-30 kW
Distributed air temperature 1.5 m from the outlet:
85 °C
Heat capacity:
1100 m³
Minimum volume of heated room:
300 m³
Dimensions (H × W × D):
38 × 21.5 × 50.5 cm
Pressure in the connection:
1.5 bar
Sheath material:
Steel plate
Max. gas consumption:
2.2 kg/h
Air flow:
750 m³/h
Functions:
Flame control
Equipment:
Piezo lighter, pressure reducing valve
Weight:
6,4 kg
Area of use:
Interior, humid environment