Philips Dual Scan Series 4000i AC3858/51

Philips Dual Scan Series 4000i AC3858/51
Philips Dual Scan Series 4000i
Air Purifier with Clean Home+ App ConnectivityAC3858/51
Healthier air in your home
Want a home free of irritating allergens? With the powerful Philips Dual Scan Series 4000i AC3858/51 air purifier, it's no problem! It features three-layer filtration—a pre-filter, an activated carbon filter, and a NanoProtect HEPA filter—that removes up to 99.97% of particles as small as 0.003µm*, including PM2.5 dust microparticles, pollen, harmful gases**, allergens, and pet dander. The Philips Dual Scan Series 4000i AC3858/51 air purifier continuously monitors the air quality in the room and evaluates the pollution level using special sensitive sensors. In automatic mode, it adjusts the performance according to the measured values. If the automatic mode isn't suitable, you can also regulate the performance manually. There's also an ultra-quiet night mode for undisturbed sleep. The air quality measured by the Philips Dual Scan Series 4000i AC3858/51 purifier can be monitored directly on its clear display. The pollution level is also indicated by colour coding or in the mobile app, along with other interesting information.

Two sensors for continuous air quality scanning
High CADR performance of 610m3/h
Removes particles as small as 0.003 µm*


Removes 99.97% of particles
The Philips Series 4000i purifier effectively removes 99.97% of all harmful airborne particles as small as 0.003µm* (800× smaller than PM2.5 particles), including PM2.5 particles, pollen, dust and pet dander. It ensures that you breathe truly healthy and clean air all year round, even during the smog season. This is thanks to its three-layer filtration, which consists of a pre-filter, an activated carbon filter and a NanoProtect HEPA filter.

For rooms up to 73m2
The Philips Series 4000i purifier cleans up to 610m3 of air per hour, allowing it to purify the air in a room within 5 minutes***. You will have purified, allergen-free air in literally every corner of the room. The Philips Dual Scan Series 4000i AC3858/51 is suitable for spaces up to 73m2.

Clear display on the Philips Air Purifier
Thanks to the clear display, you will always have up-to-date information on the air quality in the room. For a quick check, there is a colour-coded air quality display – blue means high air quality, while red indicates heavily polluted air. More detailed information on the amount of individual pollutants can be obtained from the numerical data on the display.

Smart filter status indicator
There's no need to worry about tracking when to replace the filters. The Philips Dual Scan Series 4000i AC3858/51 air purifier does it all for you. Based on the actual amount of pollutants filtered and the total operating time, it calculates when it's time to replace them and alerts you.

Genuine accessories
Keep the air consistently clean and get the best performance from your purifier. Ensure maximum lifetime and optimal air purification by using genuine Philips filters, which also extends the filter replacement frequency.

Extra quiet operation
The Philips Dual Scan Series 4000i air purifier is also suitable for use in the bedroom or a child's room. In sleep mode, it cleans the air very quietly, its lights are dimmed and can be turned off completely for your maximum comfort.

Allergy sleep mode
The standard sleep mode is also enhanced with a special allergy sleep mode. While maintaining a low noise level, the Philips Dual Scan Series 4000i AC3858/51 air purifier can provide up to 40% more clean air**** thanks to its effective detection of allergenic dust.

Track and control with the app
With the Clean Home+ app, you have constant control over your home's air quality anytime, anywhere. Through the app, you can control the fan speed, check the filter status, or compare the indoor air quality with the outdoor air quality. The app is compatible with Android and iOS and provides you with up-to-date data on the amount of pollutants captured, so you will always have an overview of the air quality in the room.

Removes 99.9% of viruses
According to independent studies, the Philips Dual Scan Series 4000i AC3858/51 air purifier can also capture aerosols that may contain respiratory viruses. The purifier has been tested by Airmid to remove up to 99.9% of viruses and aerosols from the air*****, and it has also been tested on coronavirus******.
* From the air passing through the filter. Tested with NaCl aerosol by iUTA according to DIN71460-1
** Tested by the supplier's laboratory for single-pass efficiency of the filter media at an air flow of 5.33cm/s.
*** From the air passing through the filter. Tested according to JIS B 9908-2015. This is an estimated time for a single cleaning, calculated by dividing the CADR value of 610m3/h by a room size of 48m3 (assuming the room floor area is 20m2 and the room height is 2.4m).
**** Based on CADR measurement according to GB/T-18801/2015 with the device operating in sleep mode and allergy sleep mode.
***** Microbial reduction rate test conducted at Airmid Healthgroup Ltd., tested in a 28.5m³ test chamber contaminated with airborne influenza A(H1N1). * An air purifier by itself does not protect against Covid-19, but it can be part of a plan to protect yourself and your family (US Environmental Protection Agency)
******Microbial reduction rate test was conducted in an external laboratory, in a test chamber contaminated with airborne coronavirus (IBV) aerosols with a Philips NanoProtect HEPA filter.
Technical specifications
Features
Air quality indicator
Numerical
Gas sensor
Yes
PM2.5 sensor
Yes
Modes
Auto, Turbo, Sleep and Allergy Sleep
Aerodynamic design
360-degree intake
Healthy air protect alert & lock
Yes
Light sensor
Yes
Design and finishing
Control panel colour
Black
Control panel type
Touch panel
Main body material
Plastic
Decorative ring material
Plastic
Colour
Light Silver / White
Performance
Room size
Up to 73m2
CADR (Particle)
610m3/h
Ultrafine particle removal
As small as 3nm
Filters out PM2.5
99.97%
Filters out H1N1 virus
99.9%
Filters out bacteria
99.9%
Energy efficiency rating
High
Integrated filter
FY4440/30
Recommended filter lifetime
36** months
Technical data
Voltage
230V
Frequency
50Hz
Cord length
1.8m
Power consumption
60W
Stand-by power consumption
<2W
Maximum noise level (turbo mode)
57dB
Minimum noise level (sleep mode)
18dB
Weight and dimensions
Weight
8kg
Dimensions (W × H × D)
310 × 718 × 310mm
Service
Specifications
Power outlet type
Features
Functions
Filters
Dimensions and weight
| Code: | PHICV490 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Philips Consumer Lifestyle B.V., Tussendiepen 4 9206 AD Drachten Netherlands, www.philips.com/support Pernerova 702/39, 186 00 Prague 8, [email protected]
|



