QNAP USB 4 Type-C to 1 x 10GBASE-T Network Adapter

Enjoy a stable 10GbE high-speed network with USB Type-C connectivity that dramatically improves work efficiency, even on computers without built-in network ports, with the QNAP USB 4 Type-C to 1×10 GBASE-T Network Adapter. The adapter is toCompatible with different network environments by supporting Multi-Gigabit networks for 10/5/2.5/1 GbE. The Noiseless fanless design ensures stable performance, minimal maintenance and reliable operation even with long-term use. The device speeds up your workflow by processing large files or resources faster. Accelerate file transfers and sharing, and ensure seamless remote meetings and cloud backups for uninterrupted task completion. Seamless streaming of HD videos or games ensures smooth, buffer-free playback. Simply connect the QNA-UC10G1T to a Mac® or Windows® computer using the included USB 4 cable and connect the adapter to a 10GbE switch, NAS or other 10GbE device using an RJ45 Cat 5e, Cat 6, Cat 6a (or higher) cable.

High-speed network environment

In multi-user, multi-device environments, connect your computer to the QNAP 10GbE switch with the QNA-UC10G1T network adapter to create a high-bandwidth, high-speed network for collaboration with multiple connected devices. Connect your devices to a 10GbE network with the QNA-UC10G1T and dramatically increase your team's throughput and productivity. With 1MB SMB throughput (1×10 GbE), the read speed is 1181 MB/s and the write speed is 1181 MB/s. Windows file transfer (1×10 GbE) enables download and upload speeds of 1172 MB/s.

MTU settings

When connecting to the switch, make sure that the Jumbo Frames feature is enabled on the port and the MTU size is set to 9000. On macOS, open System Settings and go to Network. Select QNA Thunderbolt Ethernet and click Details. Go to Hardware, change Configure to Manual and set the MTU to Jumbo (9,000). In Windows, open Settings and go to Network and Internet, click Change adapter options, right-click QNA Adapter and click Properties. Click Configure, go to the Advanced tab, select Frame Jumbo, and set the value to 9 KB MTU. On the NAS, open the Network and Virtual Switch, go to Interfaces and find the Ethernet adapter in the Adapter List, open the adapter menu and select Configure. Go to the IPv4 tab and set the Jumbo Frame to 9000.
Warning:
Not compatible with Windows® operating system running on ARM processors. Windows® 11 devices: Marvell AQtion AQC113 driver is required to use QNA-UC10G1T. Mac® devices: Supports macOS 12.7 to 15.4. Ubuntu devices: supports Ubuntu 22.04_kernel 6.5.0-41. The Marvell AQtion AQC113 driver is required to use the QNA-UC10G1T.