SilentPower iDefender+ USB C - C
SilentPower iDefender+ USB C - C
The SilentPower iDefender+ USB C-C adapter resolves ground loop issues in the signal path and connects audio devices. The adapter detects multiple grounds and breaks the ground loop in the USB power supply, thereby suppressing unwanted noise, humming, and sound distortion. The device uses the SuperSpeed USB 3.0 interface, which is backwards compatible with USB 2.0. It features one male USB-C connector for connecting to a computer, one female USB-C connector for connecting a peripheral device, and a second female USB-C connector for external power. The adapter works with an external 5V/1A power supply and weighs 6.6g.
Key Features of the SilentPower iDefender+ USB C-C Adapter
- The adapter eliminates ground loops in the audio chain
- The device suppresses unwanted noise and humming
- The design features gold-plated USB connectors
- The USB-C input is for connecting an external power supply
- The system disconnects power from the computer when an external source is detected
- SuperSpeed USB 3.0 technology supports fast data transfer
Eliminating Ground Loops
Connecting several audio components in a chain often creates different ground points. This condition causes distracting humming and noise, degrading the final sound performance. The adapter solves this problem by intelligently disconnecting the ground from the computer and cleaning the signal path. By correctly breaking the ground loop, it eliminates parasitic currents that prevent USB DACs from functioning properly. The result is a significant reduction in the noise floor of the audio chain and the preservation of playback transparency.
Connecting an External Power Source
If an audio converter requires power directly from the computer, a large amount of high-frequency interference is transmitted. The adapter offers a separate USB-C input port for an external power supply. When external power is connected, it blocks the polluted current from the computer and supplies clean energy directly to the DAC. This process helps maintain sound purity without interference. External 5V power sources like the iPower Elite or iPower X can be used for power.
Improving Sound Dynamics
Eliminating parasitic currents and noise has a direct impact on the final playback. The listener will notice a significantly lower system noise floor, which leads to better dynamic contrast and higher resolution of individual tones. The sound gains natural warmth and more detailed spatial presentation across the entire frequency spectrum. The signal is transmitted without loss of detail, preserving the original character of the recording for a pure listening experience.
Data Interface
The device uses SuperSpeed USB 3.0 technology with an extended connection specification for rapid data stream transfer. This standard is also fully compatible with older versions of the USB interface. The manufacturer has fitted the body with gold-plated connectors for optimal signal transfer and high corrosion resistance. The data flow remains stable under all circumstances and meets the demanding requirements for high-resolution audio transmission without any dropouts or distortion.
Easy Connection into the Chain
Operating the adapter does not require complicated setup or software driver installation. After being connected between the USB source and the DAC, the system automatically detects the presence of multiple grounds. It then independently disconnects the problematic ground points and immediately improves the overall sound performance and clarity. The connection works on a plug-and-play basis for easy integration into any audio chain, requiring no technical knowledge from the user.
Weight:
6.6g
Dimensions:
50×20×9mm
Interface Standard:
SuperSpeed USB 3.0
Maximum Voltage:
5V
Backwards Compatibility:
USB 2.0
Male Connectors:
1× USB-C
Female Connectors:
2× USB-C
Specifications
Use
Male connectors
Connector
Type and number of connectors
Standards
Cable construction
Features
| Code: | SILspoj004 |
| Warranty: | 24 months |
| Manufacturer information |
Luxusní Elektronika s.r.o., Na Slanici 444, 763 02, Zlín, [email protected], +420 227 272 707 |