Thermofol H6 installation set 1,5 m2, 225 W

3,592,-

Thermofol H6 installation set 1,5 m2, 225 W

The Termofol underfloor heating mat consists of a system of conductors laid on a special fibreglass mesh. Its installation does not raise the floor level and provides the pleasant feeling of a warm floor, which further enhances the comfort of any interior. A constant output of 150W/m² ensures optimal thermal parameters, and the system itself is in no way dependent on the existing central heating installation, so it can be controlled independently. The ready-to-use H6 installation kit is prepared for DIY installation.

Termofol H6 Installation Kit Heating Mat 0.5m², 75W

Key Features of the Termofol H6 Heating Mat Installation Kit, 1.5m², 225W

  • Designed for interior underfloor heating
  • Suitable as both main and supplementary heating
  • Heats the floor quickly
  • Independent of the central heating system
  • Can be controlled separately
  • Installation does not raise the floor height
  • Construction with conductors on a fibreglass mesh
  • Suitable for various types of floor coverings
  • Can be installed as a DIY project

Application of the heating mat:
1. Cement screed
2. Heating mat
3. Adhesive for underfloor heating or self-levelling compound
4. Ceramic tiles / parquet / stone

Site preparation and installation:
The first step in laying the mat is to create an opening in the wall for two pipes to house the power cable end and the sensor wire. A flush-mounted box (Ø 60) must also be placed in the wall for the installation of the temperature controller. Then, you can proceed to lay the system on the floor. For the underfloor heating mat to serve its purpose, it must be spread evenly over the entire floor area. It is particularly important to maintain equal spacing and avoid downpipes, sewer drains, hot water installation elements, or heating pipes. If these elements fail and need to be replaced in the future, the conductors could be mechanically damaged. The heating mat should not be laid so that it passes between separate rooms, nor under permanently installed furniture or equipment. However, it is permissible to lay it under wall-hung sanitary ware or furniture standing on legs. The electrical conductors must never be shortened. If the heating foil or heating mat under the panels, terracotta or floor covering is too long and does not fit in the room, cuts may only be made in the mesh.

Specifications

Location

Location Pavement

Features

Cable type Two-wire
Heating power 225 W
Max. heating mat temperature 70 °C
Mat properties Self-adhesive surface
IP Code IPx7

Dimensions and weight

Width 50 cm
Flat 1.5 m2
Heating wire thickness 3.6 mm
Code:  TERMtoHO002
Warranty: 24 months