Thermofol H6 installation set 4,5 m2, 675 W
Thermofol H6 installation set 4,5 m2, 675 W
The Termofol underfloor heating mat consists of a system of conductors laid on a special fibreglass mesh. The installation does not raise the floor level and provides a pleasant feeling of a warm floor, which also increases the comfort of any interior. A constant output of 150W/m² ensures optimal thermal parameters, and the system itself is in no way dependent on the existing central heating installation, so it can be controlled independently. The ready-made H6 installation kit is prepared for DIY installation.
Key Features of the Termofol H6 Heating Mat Installation Kit, 4.5m², 675W
- Designed for interior underfloor heating
- Suitable as both main and supplementary heating
- Fast floor heating
- Independent of the central heating system
- Can be controlled separately
- Installation without raising the floor height
- Construction with conductors on a fibreglass mesh
- Suitable for various types of floor coverings
- Can be installed as a DIY project
Heating Mat Application:
1. Cement screed
2. Heating mat
3. Adhesive for underfloor heating or self-levelling compound
4. Ceramic tiles / parquet / stone
Structural Preparation and Installation:
The first step to laying the mat is to create a hole in the wall for 2 pipes, into which the end of the power cable and the wire with the sensor will be placed. It is also necessary to place a flush-mounted box (Ø 60) in the wall for the installation of the temperature controller. Then you can proceed to lay the system on the floor. For the underfloor heating mat to fulfil its purpose, it must be spread evenly over the entire floor area. It is particularly important to maintain equal spacing and to avoid downpipes, sewer drains, hot water installation elements or heating pipes. In the event of a fault and the need to replace these elements in the future, the conductors could be mechanically damaged. It is not advisable to lay the heating mat so that it passes between separate rooms, nor under permanently installed furniture or equipment. On the other hand, it is permissible to lay it under wall-hung sanitary ware or furniture standing on legs. The electrical conductors must never be shortened. If the heating foil or heating mat under the panels, terracotta or floor covering is too long and does not fit in the room, cuts may only be made in the mesh.
Specifications
Location
Features
Dimensions and weight
| Code: | TERMtoHO012 |
| Warranty: | 24 months |