Thermofol H6 installation set 6 m2, 900 W
Thermofol H6 installation set 6 m2, 900 W
The Termofol underfloor heating mat consists of a system of wires laid on a special fibreglass mesh. The installation does not raise the floor level and provides the pleasant feeling of a warm floor, which enhances the comfort of any interior. A constant output of 150W/m² ensures optimal heating performance, and the system itself is in no way dependent on the existing central heating installation, so you can control it however you like. The H6 complete installation set is ready for DIY installation.
Key features of the Termofol H6 heating mat installation set, 6m², 900W
- Designed for interior underfloor heating
- Suitable as a primary or supplementary heating source
- Heats the floor quickly
- Independent of the central heating system
- Can be controlled independently
- Installation does not raise the floor height
- Construction with wires on a fibreglass mesh
- Suitable for various types of floor coverings
- Can be installed DIY
Heating mat application:
1. Cement screed
2. Heating mat
3. Adhesive for underfloor heating or self-levelling compound
4. Ceramic tiles / parquet / stone
Site preparation and installation:
The first step in laying the mat is to create a hole in the wall for two pipes to house the end of the power cable and the sensor wire. You must also install a Ø60 flush-mounted box in the wall for the temperature controller. You can then proceed to lay the system on the floor. For the underfloor heating mat to function correctly, you need to spread it evenly over the entire floor area. It is particularly important to maintain consistent spacing and avoid downpipes, sewer drains, hot water installation elements or heating pipes. In the event of a fault and the need to replace these elements in the future, the wires could be mechanically damaged. It is not advisable to lay the heating mat so that it runs between separate rooms or under fixed furniture or equipment. However, it is permissible to lay it under wall-hung sanitary ware or furniture on legs. The electrical wires must never be shortened. If the heating film or mat under the panels, terracotta or flooring is too long and does not fit in the room, you may only cut the mesh.
Specifications
Location
Features
Dimensions and weight
| Code: | TERMtoHO015 |
| Warranty: | 24 months |