TP-LINK TL-SG1008P

A high-quality ethernet switch which can connect up to 8 devices to your network, with a transfer rate of up to 1Gbps per port. 4 ports are equipped with power over ethernet using PoE standard. The switch supports a variety of ethernet protocols, such as 802.3u, 802.3ab and 802.3af. Each of the eight ports has an LED indicator which makes it easy to check the correct running of individual ports and the status of your network. The switch has an aggregate bandwidth of 16Gbps and supports both full-duplex as well as half-duplex mode.
Each port detects the correct speed, and with Auto-MDIX technology, which automatically detects crossed and non-crossed cables, connecting to other hubs is easy. There is also support for the auto-learning of MAC addresses, for which there are 8000 memory positions available.
Specifications:
Supported Standards:
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3af
Supported Protocols:
CSMA/CD, TCP/IP
Basic Functions:
Wire-speed Performance
Auto-learning MAC addresses, Auto-aging
IEEE 802.3 x flow control for Full-Duplex mode and "backpressure" for Half-Duplex mode
The Feedback Bandwidth (Backbound Bandwidth):
16Gbps
Size Table for MAC Addresses:
Approximately 8000 positions
Forwarding Rate:
10BASE-T: 14,880pps/port
100BASE-TX: 148,800pps/port
1000BASE-T: 1,488,000pps/port
Transmission Method:
Store-and-Forward
Ports:
8 x RJ45 port 10/100/1000Mbps, supports Auto-Negotiation and Auto MDI/MDIX
Supported Media Types:
10Base-T: UTP category 3, 4, 5 with a maximum length of 100m
EIA/TIA-568 100U STP cable with a maximum length of 100m
100Base-Tx: UTP cable, Category 5, 5e with a maximum length of 100m
EIA/TIA-568 100U STP cable with a maximum length of 100m
1000Base-T: UTP cable, Category 5, 5e, 6 with a maximum length of 100m
EIA/TIA-568 100U STP cable with a maximum length of 100m
LED Indication:
Power, speed indications 10/100/1000
Safety and Emissions:
FCC, CE
Dimensions:
171 x 98 x 27mm
Operating Temperature:
0 ° C ~ 40 °C
Power:
Using an external power adapter