Value Media converter 1 Gb, RJ45 - SFP
Value Media converter 1 Gb, RJ45 - SFP
The Value 1 Gb, RJ45 - SFP Media Converter converts the signal between a copper line and an optical network at the Gigabit standard. The network element transforms a 10/100/1,000Mbit/s copper port into an optical interface depending on the SFP module used. The device operates at a transmission speed of 1,000Mbit/s and complies with IEEE 802.3, IEEE 802.3i, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab and IEEE 802.3x standards. The physical dimensions of the network element are 27 × 71 × 99mm, so it takes up minimal space on a desktop or in a rack. The 175g metal chassis provides resistance to external electromagnetic interference in demanding environments. The metal housing effectively dissipates heat from the internal components. The front panel features LED indicators for line and power, which facilitate operational diagnostics.
Key Features of the Value 1Gb, RJ45 - SFP Media Converter
- The device supports a transmission speed of 1,000Mbit/s for fast data transport
- The RJ-45 port has an integrated auto MDI/MDI-X function for automatic cable type detection
- The converter requires a low power consumption of only 3W for operation
- The metal chassis measures 27 × 71 × 99mm
- The device operates reliably at ambient temperatures from 0°C to 65°C
- The SFP slot allows the choice of a single-mode or multi-mode module
Flexible Optical Connection
The device's SFP port allows for the installation of the appropriate module according to the current needs of the route. The converter supports 62.5/125µm and 50/125µm multimode optical cables, which allows for easy integration into existing infrastructure without the need to replace cabling. The optical port speed reaches a stable 1,000Mbit/s and complies with the IEEE 802.3u 100Base-FX specification with forced full duplex at 100Mbit/s.
Copper Port
The copper interface features a single shielded RJ-45 connector with automatic MDI/MDI-X crossover cable detection. The integrated auto-negotiation function automatically sets the speed and duplex mode according to the connected counterpart. The port supports full and half-duplex for smooth data transfer at 10/100/1,000Mbit/s and meets the requirements of IEEE 802.3 10Base-T and IEEE 802.3u/3i/3z/3ab/3x standards.
Economical and Reliable Operation
The device stands out for its very low electricity consumption of only 3W. It is powered by the included external power supply with 5V DC and 1A parameters. The converter operates reliably over a wide temperature range from 0°C to 65°C, making it suitable for installation in racks. The manufacturer supplies the device with a manual for easy connection without the need for complex configuration.
Package Contents:
Converter, power supply
Transmission Speed:
1,000Mbit/s
Type:
SFP
Output:
Optical, Copper
Supported Standards:
IEEE 802.3ab, IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.3x
Temperature Range:
From 0°C to 65°C
Specifications
Features
Supported standards
Dimensions and weight
Package contents
| Code: | VALmed002 |
| Warranty: | 24 months |
| Manufacturer information |
SECOMP Electronic Components GmbH Einsteinstrasse 17-23, 76275 Ettlingen, Germany, [email protected] www.secomp.de 
|