WIFI RGB+W tape driver 100W with remote control
WIFI RGB+W tape driver 100W with remote control
This Wi-Fi controller with a remote is designed for 12V or 24V RGB+W LED strips with a power input of up to 100W. It lets you choose from 16 colours with various brightness combinations, adjust each colour individually, and use 4 automatic colour-changing modes. The controller has a range of approximately 4m. You can control the LED strip either with the remote control or through the Magic Home Pro app on your mobile device. The R (red), G (green), B (blue), and W (white) buttons set the strip's colour, and the buttons below them select shades of these colours. The remote control is powered by a CR2025 button cell battery, which is included in the package.
Key features of the smart wireless Wi-Fi controller for RGB+W strip with remote control, 100W
- External sensor for remote control reception for more flexible installation
- Designed for controlling RGB+W LED strips
- Control via remote or mobile app
- Supports multiple colours and their combinations
- Brightness and intensity adjustment
- Adjust individual colour components
- Preset colour-changing modes
- Button control for lighting effects
Package contents:
Controller, user manual, sensor, battery
Function control:
Two top-left white buttons for decreasing and increasing brightness. The top black button to stop the effect. The top-right red button for turning on/off. FLASH, STROBE, FADE, and SMOOTH buttons for preset effects.
Power supply:
12V DC
Specifications
Connection
Connectivity
Use
Control
Location
Features
Maximum load
Material
Usage
Battery
Dimensions and weight
Packaging
| Code: | ENTel010 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Bramcke GmbH,Schoellerstraße 33, 52353 Düren, Spolková republika Německo, [email protected] |