Autoprofi DPF Flush 5l
Autoprofi DPF Flush 5l
This effective Autoprofi DPF product in a 1000ml volume is designed for cleaning and protecting DPF/FAP filters. The cleaner is gentle on aluminium, zinc and cadmium materials. The unique composition of the DPF Flush product dissolves and removes all residues, not just the soot captured by the particulate filter during fuel combustion. Its advantage and uniqueness lie in the fact that the flushing fluid binds to the soot, and after a certain time, as the liquid works within the filter, the deposited soot turns into a slurry. This slurry detaches from the filter walls and is then simply rinsed out with clean water. Cleaning with this product is very easy yet highly effective. With correct application, you can easily achieve up to 98% of the filter's original throughput in under 12 hours. The particulate filter flush is also very gentle and does not damage the filter. It can be used on all aluminium, magnesium, zinc, and cadmium parts. It is also suitable for the latest generations of DPF/FAP filters.
Key Features of Autoprofi DPF Flush, 5L
- For the care of DPF/FAP filters in engines with a diesel particulate filter
- Effectively cleans, protects, and extends the life of the filter
- Dissolves soot and has preventative effects
- The product is suitable for vehicles equipped with a diesel particulate filter
- Dissolves soot and is very easy to apply
- Very gentle on various materials
- The required amount depends on the size of the particulate filter (usually approx. 3–5 litres depending on the car model)
Use:
Shake the container of liquid before use! Remove the diesel particulate filter and visually check it for mechanical damage. Before filling with the flushing fluid, seal all openings, then pour the liquid into the diesel particulate filter until it is completely full! Leave to act for at least 10 hours. Shake occasionally and top up with the flushing fluid if necessary. After the time required for cleaning the filter has passed, thoroughly rinse the DPF with clean, warm water. Allow to dry. After completing the cleaning process with the DPF Flush, re-install the filter onto the vehicle. Then, pour the DPF Cleaner product into the fuel tank (observe the dosage) and carry out a test drive for at least 20 minutes. If regeneration does not start automatically, initiate it using the electronic device at your service centre.
Warning:
H314 Causes severe skin burns and eye damage
P101 If medical advice is needed, have product container or label at hand
P102 Keep out of reach of children
P301+P330+P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
P310 Immediately call a POISON CENTRE or doctor
P405 Store locked up
P501 Dispose of this material and its container at a collection point for special or hazardous waste
Specifications
Volume
Usage
Season
Type
| Code: | AUPR264098 |
| Warranty: | 24 months |
| Manufacturer information |
Autoprofishop.cz, K Letišti 907, 339 01 Klatovy, +420 608 076 136,[email protected] 
|