Autoprofi Foam Cleaner DPF/KAT 400ml
Autoprofi Foam Cleaner DPF/KAT 400ml
This effective 400ml Autoprofi DPF/CAT Foam is designed to clean and protect your DPF filter and catalytic converter. It is suitable for both diesel and petrol engines. It dissolves deposits and is very easy to apply. The cleaner also helps with the maintenance of valves and pressing machines, for example. It is suitable for all closed DPF/FAP systems and catalytic converters, or EGR valves and disassembled components contaminated with soot, and can also be used in industry (maintenance of pressing machines, etc.).
Key features of the Autoprofi DPF / CAT foam cleaner, 400ml
- For the care of DPF filters and catalytic converters
- Suitable for diesel and petrol engines
- Effectively cleans, protects and extends filter life
- Dissolves deposits and has preventive effects
- Simple application
- Evaporates completely (when applied to DPF/CAT)
Instructions for use:
Before cleaning, check the engine oil level; if it is contaminated with diesel, the oil must be changed. Shake well for 1 minute before use! Remove the temperature/pressure sensor or lambda sensor (depending on the filter type). Insert the tube through the resulting opening and spray inside at 5-second intervals until the filter is completely full of foam. Then, reinstall the sensor and return everything to its original state. Start the regeneration process via diagnostics. Then, clear all existing errors and perform a test drive for 20 minutes. For optimal recovery after cleaning, it is recommended to add DPF Cleaner to the tank after the test drive for a DPF filter, or Catalytic Converter and Lambda Sensor Cleaner for a catalytic converter. If the filter is more than 60% clogged, it is recommended to use DPF Flush.
Reaction time:
approx. 20 minutes
Consumption:
400ml is enough for one DPF/FAP/CAT
Warning:
For petrol vehicle owners: the product can also be used for petrol vehicles, but due to the absence of a particulate filter (as is the case with most cars so far), it is not possible to start regeneration. Therefore, the effectiveness of the product may be reduced due to the lack of regeneration (i.e., controlled creation of the required temperature). (The temperature can also be reached by a test drive at higher revs, but this is an uncontrolled process with all its consequences).
H229 Pressurised container: May burst if heatedH315 Causes skin irritationH318 Causes serious eye damageP101 If medical advice is needed, have product container or label at handP102 Keep out of reach of childrenP210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources, no smokingP251 Do not pierce or burn, even after useP260 Do not breathe dust, fume, gas, mist, vapours or sprayP280 Wear protective gloves, protective clothing, eye protection or face protectionP302+P352 If on skin, wash with plenty of waterP305+P351+P338 If in eyes, rinse cautiously with water for several minutes, remove contact lenses, if present and easy to do, continue rinsingP310 Immediately call a poison centre or doctorP410+P412 Protect from sunlight, do not expose to temperatures exceeding 50°C / 122°FP501 Dispose of this material and its container at a collection point for special or hazardous waste
Specifications
Volume
Usage
Season
Type
Features
| Code: | AUPR264099 |
| Warranty: | 24 months |
| Links: | Product Fiche |
| Manufacturer information |
Autoprofishop.cz, K Letišti 907, 339 01 Klatovy, +420 608 076 136,[email protected] 
|