Chemical Guys EcoSmart concentrate

Treat your car with the best possible care in the form of a unique waterless cleanser. This is a "spray and wipe" cleaning and is particularly suitable where there is no water or sewage system. You can easily and efficiently remove dirt from various surfaces without wasting water. The product contains lubricating ingredients, active nano sealants, Brazilian Carnauba wax and fine lubricant additives. The impurities are literally wrapped and "lifted off" from the paint, which prevents potential scratching when being wiped with a microfiber cloth.

Key Features of Chemical Guys EcoSmart concentrate

• Unique waterless washing
• Using "Spray and Wipe"
• Suitable for detailed work
• It is extremely gentle to car paint
• Prevents potential scratching
• Strong concentrate for 16:1 dilution with distilled water

For Washing Cars and Motorcycles Without Water

Chemical Guys EcoSmart RU can be labeled not only as a detergent for cleaning and decontamination, but also as a precise polishing agent for polishing and waxing. Its pH is neutral and is therefore extremely gentle to the paint and varnish of the car and even to the waxes that have already been applied. It is a strong concentrate that is recommended to dilute with distilled water in a 16:1 ratio.

How To Use the Chemical Guys EcoSmart Concentrate?

• Dilute in a recommended ratio of 16:1 with distilled water.
• The product must be shaken thoroughly before use.
• Spray the product from top to bottom directly on the dirty surface and let it work for a while to penetrate sufficiently into the dirt layer.
• Then gently wipe the surface with a microfiber cloth.
• After wiping the coarse dirt, turn the microfiber cloth over to its clean surface and, depending on the amount of dirt, repeat the procedure.
• Start wiping from the roof downwards for each part of the bodywork. Clean a front bumper, rear bumper, wheel arches and thresholds as the last.
• We recommend using a high-quality microfiber cloth, ideally long-haired.
• When cleaning small areas (door interior and engine), the product can be applied directly with the cloth.
• Finally wipe the surface dry and polish with a clean microfiber cloth.
• Do not let the product dry.