CHEMSTR Bio-cleaner Floor 30l

It is dilutable up to a ratio of 1:40 and cleans from impurities such as dust, oil, grease and other industrial impurities. It is possible to use the Bio-floor cleaner also for manual cleaning, but it mainly serves as a filling for floor cleaning equipment.

The new range of special alkaline water-based cleaners is designed for cleaning and degreasing tools, machines, means of transport, workshop components (cabinets, tables, floors), engines, gearboxes and smaller machine parts.

They effectively remove oil, fat, wax, resin, soot, asphalt in tar. Bio cleaners can be used to clean metals, plastics, ceramics, wood, rubber or concrete. The application can be performed manually or automatically according to the type of cleaner. Cleaning agents from the BIO series can be diluted with water according to the type, temperature and application up to a ratio of 1:40. Dilutability is affected by factors such as contamination strength, material, temperature and mechanical assistance. A lower dilution coefficient is suitable for thicker impurities, but even at higher dilutions it is possible to achieve the same results by heating and pressure. The Bio floor cleaner is intended for use in industry and households. The product is slightly foaming, without corrosion protection.

Advantages:

• effectively and economically cleans and degreases
• is non-flammable, without danger marking
• does not contain phosphates or solvents
• as required, it is dilutable up to a ratio of 1:40
• biodegradable agent (VOC-free)
• operating temperature up to + 90 ° C
• possibility to reduce foaming

Instructions for use:

We dilute the Bio floor cleaner according to the strength of the dirt and the material. Heating (up to + 90 ° C) increases the cleaning effect and even the most difficult dirt can be removed. In the case of manual use, impurities must be mechanically removed after application - with a cloth, brush, paintbrush.

Packing:

• 30 liters, canister