Digital Tyre Tester, 0,2-10 Bar

The digital tire pressure gauge with a pressure range of 0.2 to 10 bar will serve well not only for all car enthusiasts. reliably measures tire pressure in a few moments, you can read the results on a clear and illuminated LED display . The user will also use the automatic shut-off function or the option to change the PSI, BAR and KPA units.

Manual

1. Clean the airway valve before measuring. The ingress of dirt into the pneumatic sensor damages its mechanism and affects the accuracy of the measurement.
2. Check that the hand of the tire gauge is in the leftmost position.
3. Attach the end of the pneumatic meter to the air valve so that it resiliently rests on the end seal. With a larger air leak, the measurement may be inaccurate and therefore we repeat the measurement.
4. The hand records the measured value and the pneumatic meter is removed from the valve.
5. After reading the unmeasured value, return the hand to the home position by pressing the button.
6. If the pneumatic meter has not been used for a long time, we recommend first to release the mechanism 2-3 times with air pressure and only then to find out the measured value.