Magma ZMGSSIDSP Pneumatic injector removal kit
9,295,-
Magma ZMGSSIDSP Pneumatic injector removal kit
The Pneumatic Injector Removal Kit has been specifically designed to facilitate the removal of copper washers under the injector, around which the build-up of carbon deposits makes removal very difficult. It has a sliding hammer that allows easy removal of stuck and glued pads. The washers are attached by means of a fine threaded cone. Valid for 99% of injectors available on the market.
Material:
steel
Torque:
20-30 Nm
20-30 Nm
Types of injectors:
Bosch, Delphi, Denso, Siemens and threaded connections
Bosch, Delphi, Denso, Siemens and threaded connections
Adapters:
M8×1,0, M8×1,25, M8×1,5, M14×1,5, M16×1,5, M17×1,0, M18×0,75, M18×1,5, M20×1,0, M20×1,5, M22×1,5, M25×0,5, M25×1,0, M26×0,75, M27×0,75, M27×1,0, M29×1,0, M31×0,75
M8×1,0, M8×1,25, M8×1,5, M14×1,5, M16×1,5, M17×1,0, M18×0,75, M18×1,5, M20×1,0, M20×1,5, M22×1,5, M25×0,5, M25×1,0, M26×0,75, M27×0,75, M27×1,0, M29×1,0, M31×0,75
Weight:
1.5kg
1.5kg
Length:
330 mm
330 mm
Range of washer holes:
5-13 mm
5-13 mm
For pad sizes:
5-13 mm
5-13 mm
Whole description
| Code: | AUPRnar0344 |
| Warranty: | 24 months |
| Links: | Producer's Website: |