MANIAC - ceramic shampoo 500ml for Car detailing

Ceramic Shampoo Maniac pro Car detailing with SiO₂ technology provides a self-cleaning, hydrophobic finish that keeps your car cleaner for longer. It cleans, seals, and protects for up to 90 days in a single step. It contains super-hydrophobic SiO₂ ceramic polymers that bond to the surface, creating a shield resistant to both caustic and acidic chemicals. It leaves the surface silky smooth and delivers an extreme shine comparable to a pot wax. It creates a balanced, lubricating foam that easily removes dirt and prevents micro-scratches or swirls. When used for maintenance, it enhances the protective properties of previously applied wax, sealant, or ceramic coating.

Instructions for use:
Hand wash with a bucket:
Pour 4 capfuls of Ceramic Shampoo into a bucket of water and use it like a regular car shampoo. Wash one panel at a time, always in the shade on a wet vehicle, starting from the bottom and working your way up – the opposite of how you would use a classic shampoo. This is because if you were to start from the top with Ceramic Shampoo, you would risk uneven coverage. However, by starting from the bottom, you can guarantee even and effective application and coverage. You can use a microfibre mitt or a soft pad, whichever you prefer, as long as it is made of perfectly clean, soft microfibre. Work panel by panel, applying the product to all parts, including emblems and details. We recommend working in STAGES, for example, half the vehicle at a time: this prevents the product from drying on the bodywork, even on the hottest days. Finish washing the entire car, then proceed to rinse and dry with a Super Dryer super-absorbent microfibre cloth.
Enhancing the hydrophobic and protective properties of Ceramic Shampoo:
First method: Use a microfibre mitt or pad, the same one you used for washing. In a measuring bottle, dilute the product at a 1:5 ratio (1 part product to 5 parts water). Spray the resulting solution onto the same wash sponge or mitt and wash the entire vehicle step-by-step, always half the vehicle at a time, without missing any spots, exactly as you did during the washing phase. Rinse and proceed to dry with our Super Dryer microfibre cloth.
Second method: First, pre-wash the car with Foam Gun Prewash and hand wash with a mitt using Neutral Foam Shampoo. In a measuring bottle, dilute the Ceramic Shampoo at a 1:3 ratio (1 part product to 3 parts water). Spread the solution over the entire car from the bottom up using a foam lance. Wait at least 1 minute. Rinse with a pressure washer from the top down. Proceed to dry with the Super Dryer microfibre cloth.
Finally, dry the car with our Super Dryer ultra-absorbent microfibre cloth for quick, effective, and completely safe drying. We recommend using two Super Dryer cloths: one for the bodywork and the other for the windows, leaving them until last to keep the cloth as dry as possible. You can also use the Super Dryer to finish profiles or delicate details. Additionally, when drying the sides or lower parts of the car, fold the drying cloth so it doesn't touch the ground and pick up dirt that could cause scratches.
Recommendations:
To prevent the shampoo from drying and leaving spots, wash your car in the shade and never in direct sunlight.
If the vehicle has been in the sun or the bonnet is very hot, cool the surface with a stream of cold water.
Start from the top – this is the least dirty part, so you will avoid getting your mitt dirty: washing will be quicker.
Try using two buckets – put your water and shampoo solution in the first one, and just water in the second for frequently rinsing your sponge or mitt: this will prevent scratching the bodywork.
Wash in small sections – You won't miss any spots, the product will be able to work as effectively as possible without drying out, and you'll avoid spots and streaks.
Perfect circles – use a brush to clean the rims, which can reach even the most hidden places.

Warning:
Ensure the vehicle surface is not hot and is in the shade, out of direct sunlight. We recommend using the two-bucket wash method (one with the shampoo and water solution, and the other with just clean water) in combination with a microfibre wash pad or mitt, such as our “Double Face”. Before using Ceramic Shampoo, as with any hand shampoo wash, perform a thorough pre-wash using “Foam Gun Prewash” to remove coarse dirt from the surface and make the subsequent hand-washing phase easier. To increase the product's effectiveness and extend its protection, it is recommended to decontaminate the car with Iron Remover and a clay bar before applying Ceramic Shampoo. This will ensure better adhesion of the SiO₂ ceramic polymers to the bodywork. When using Ceramic Shampoo, we recommend the two-bucket wash method (one with the shampoo and water solution, and the other with just clean water) in combination with a microfibre mitt, like our Double Face, or a sponge or pad, such as our Microfiber Pad. Use a separate tool (sponge or mitt) to wash the rims and tyres. Using a grit guard in the bucket helps to remove dirt from the mitt or sponge, causing it to settle at the bottom of the bucket.
P102 Keep out of reach of children.
H319 Causes serious eye irritation.
H412 Harmful to aquatic life with long-lasting effects.
P273 Avoid release to the environment.
P280 Wear protective gloves and eye protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.