AXAGON ADSA-D25, dual 2.5" HDD/SSD CLONE MINI dock, SuperSpeed USB 5 Gbps

With the AXAGON ADSA‑D25 external docking station, you can easily connect an external hard drive to your computer or laptop. You connect it to your computer using the micro USB cable provided. It can accommodate up to two 2.5-inch SATA hard drives, which are simply inserted into the docking station. You’ll also appreciate the ability to clone drives without having to connect them to a computer. Traditional LED indicators show the progress of the cloning process. The AXAGON ADSA‑D25 external docking station is equipped with a SATA 6G interface, which allows the use of modern SSDs. A robust aluminium casing with a brushed finish ensures high durability, whilst rubber feet provide stability.

Package contents:
SSD/HDD dock, 60 cm USB Micro-B <-> USB-A cable, 100 cm power cable, multilingual manual
Features: 
Compatible with USB 3.2 Gen 2 (USB 3.1 Gen 2), USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0), backwards compatible with USB 2.0
Supports transfer speeds of 5000 / 480 Mbit/s (SuperSpeed / HighSpeed).
Complies with the Serial ATA 3.0 specification (SATA/600), transfer rates up to 6 Gb/s (600 MB/s)
Complies with the Serial ATA 2.0 specification (SATA/300), transfer rates up to 3 Gb/s (300 MB/s)
Complies with the Serial ATA 1.0 specification (SATA/150), transfer rates up to 1.5 Gb/s (150 MB/s).&
Complies with the USB Mass Storage Class specification
The total throughput / transfer rate of the device is determined by the USB interface used (theoretical 5 Gbit/s)
BOT (Bulk-Only Transport)
Support for UASP (USB Attached SCSI Protocol) for faster data transfer in Windows 8 and later
Support for the TRIM function to limit the gradual degradation of SSD performance over time
Support for S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) – a system for monitoring the drive’s status
Support for booting from an SSD/HDD in a docking station
Hot-plug capability
Full Plug and Play support
HDD Auto Spin Down – disabling drives during inactivity
HDD Turn Off – disabling the drive after removing the device or putting the PC to sleep   
Connection via USB 3.2 Gen 1 Micro-B female connector  
Input:
USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB 5 Gbps
Speed up to 5 Gbit/s
Connection via USB Micro-B female connector
Device support:
SATA III interface – 6 Gb/s (600 MB/s)
Supports 2.5" SSDs/HDDs
Max. drive capacity – all without restriction
Max. height of 2.5" drive – all without restriction
Power supply:
USB-A <-> 3.5/1.3 mm DC 5 V, 1 m long (included)
The cable allows the docking station to be powered from a computer’s USB-A port or a standard mobile phone charger with a USB-A output of 5 V/min. 1 A, e.g. AXAGON ACU-QC18.
Power switch
Disk cloning function:
Cloning takes place without the docking station being connected to a computer
The destination disk must have the same or greater capacity than the source disk; otherwise cloning cannot be started
Both HDD and SSD hard drives can be cloned
SSD cloning speed up to 300 MB/s
The total time taken to clone the drive depends on the capacity of the source drive, not on the amount of data on the drive
Dimensions:
89 × 58 × 59 mm

Weight:
137 g
Supported operating systems:
Windows 7, 8, 10, 11 and later, Windows Server 2008, 2012; 2016; 2019; 2022 and later (all 32-bit and 64-bit versions of Windows are supported), Mac OS X 10.x and later, Linux with kernel 2.6.x and later
Drivers are included with the supported operating systems and are installed automatically. No other drivers need to be installed, nor are any available.