AXAGON EEM2-GTR, M.2 NVMe THIN RIB Box, SuperSpeed USB-C 10Gbps, Black
AXAGON EEM2-GTR, M.2 NVMe THIN RIB Box, SuperSpeed USB-C 10Gbps, Black
The high-speed AXAGON EEM2-GTR THIN RIB external enclosure with a USB 3.2 Gen 2 interface is designed for NVMe (PCI-Express) M.2 SSDs. Connection to a computer is provided via the reversible USB-C connector on the enclosure, together with the supplied USB-C to USB-C cable. The ribbed design of the enclosure and the heat-conductive pads ensure effective cooling of the inserted M.2 SSD. This extends its lifespan and prevents the drive’s speed from being reduced due to ‘thermal throttling’. The robust enclosure also provides additional protection for the drive. The SuperSpeed USB 10 Gbit/s interface ensures the high speeds of modern M.2 SSDs. Thanks to the high-speed USB 3.2 Gen 2 interface, transfer speeds reach up to 10 Gb/s. NVMe M.2 SSDs measuring up to 22 × 80 mm can be used in the external enclosure. The enclosure has no capacity restrictions for SSDs. M.2 cards can be single-sided or double-sided. By inserting an M.2 SSD into the enclosure, you can easily create a fast and compact external drive. The enclosure can be used with computers and laptops as well as with mobile phones and tablets.
Key features of the AXAGON EEM2-GTR external enclosure, M.2 NVMe THIN RIB box, SuperSpeed USB-C 10 Gbps, black
- Compatible with USB 3.2 Gen 2, backwards compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0
- Support for data transfer rates of 10,000 / 5,000 / 480 Mbit/s (SuperSpeed+ / SuperSpeed / HighSpeed)
- Support for M-key or B+M-key NVMe (PCI-Express) M.2 SSDs with no maximum capacity limit
- Support for M.2 drives in the following sizes: 2230, 2242, 2260 and 2280 mm
- Support for single-sided and double-sided M.2 SSDs
- Complies with the PCI Express Base Specification Revision 3.1a
- Complies with the NVM Express 1.3 specification
- Complies with the USB Mass Storage Class specification
- The total throughput / transfer rate of the box is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s)
- The actual throughput / transfer rate of the box, at around 1,000 MB/s (1 GB/s), is determined by the limitations of the USB 3.2 Gen 2 interface
- Support for UASP (USB Attached SCSI) for faster data transfer in Windows 8 and later versions
- Support for the TRIM function to limit the gradual degradation of SSD performance over time
- Support for booting from an SSD in an external enclosure
- The ability to connect devices whilst the system is running, thanks to Hot Plug support
- Full Plug and Play support
- Support for power-saving mode — the hard drive goes to sleep after 5 minutes of inactivity
- Power supplied via the USB bus at up to 900 mA from a single USB port is entirely sufficient in all cases
- A blue LED indicating connection to a computer’s USB port (steady light) and data transfer (flashing)
- The aluminium finned heatsink and heat-conductive pads help to improve the cooling of the M.2 SSD
- A higher surface temperature of the enclosure is not a fault—thanks to the aluminium casing, the heat generated by the drive’s operation is better dissipated and transferred to the surroundings
- Connection via a USB 3.2 Gen 2 Type-C female connector
- A 20 cm USB Type-C male to USB Type-C male cable is included in the pack
Supported operating systems
The AXAGON EEM2-GTR external box supports MS Windows 7/8/8.1/10 and later, Windows Server 2008/2012/2016 and later (all 32- and 64-bit versions of Windows are supported), Mac OS X 10.x and later, Linux with kernel 2.6.x and later, and Android (OS and device support required). When using Windows 7, you must check with the manufacturer of the M.2 SSD to confirm support for this OS and the availability of a driver.
Package contents:
USB-C 3.2 Gen 2 external enclosure for NVMe M.2 SSDs, 20 cm USB-C to USB-C cable, thermal pads, mounting hardware and a screwdriver, multilingual manual
Input:
USB 3.2 Gen 2 / SuperSpeed+ USB with speeds of up to 10 Gbit/s. Connection via reversible USB Type-C female connector
Device support:
NVMe (PCI-Express) M.2 SSDs, designed for M-key or B+M-key format cards, NGFF 75-pin M-key slot for NVMe M.2 drives.
Specifications
Supported drives
Connectors
Features and functions
Material
Dimensions and weight
Packaging
| Code: | AG302a2 |
| Warranty: | 36 months |
| Links: | Producer's Website: |