Bentech A100S autonomous siren with solar panel
Don't like the alternatives?
Choose from the full offer
Bentech A100S autonomous siren with solar panel
The Bentech A100S standalone outdoor alarm is equipped with a PIR sensor that can detect motion at a distance of at least 6 meters (depending on the surrounding environment). If the sensor detects movement, a siren with a volume of 100 dB is triggered, accompanied by a visual alarm in the form of four flashing red LEDs. The detection efficiency is further enhanced by a Fresnel lens that prevents false alarms caused by sunlight interference. You can choose from 5 alarm modes (night or day mode, light-only), so you can easily adapt the functionality of the device to your needs. The Bentech A100S alarm has a waterproof design with IP67 rating, allowing it to be used in harsh outdoor conditions. The device is powered by a built-in solar panel with a power of 0.6 W.
Key features of the Bentech A100S autonomous siren with solar panel
- Autonomous motion detector with PIR sensor is equipped with a siren with a volume of 100 dB
- The device detects motion up to 6 meters (depending on the surrounding environment)
- Distinctive light alarm in the form of 4 flashing red LEDs
- Alarm Bentech A100S has a rugged design with IP67 rating
- You can choose from 5 operating modes (night or day mode, light alarm only, etc. )
- Bentech A100S is equipped with a Fresnel lens to prevent false alarms
- Includes a handy remote control with a range of up to 10 metres
Easy installation and operation
The Bentech A100S solar panel siren is designed to be installed on a wall or other smooth surface using the included mounting plates and bolt sets. For maximum detection, it is advisable to place the device in a location with a good view of the surrounding area. The package also includes a handy Remote with a range of up to 10 metres, which allows you to conveniently turn the alarm on or off or set the operating mode.
Package contents
- Autonomous siren Bentech A100S
- Mounting plate and screw set
- Remote control
- Handbook
Technical specifications:
Frequency: 433 MHz
Sensor: PIR
Degree of coverage: IP67
Volume: minimum 100dB within 1 metre
Battery type: 3.7 V × 600 mAh
Type of solar panel: polysilicon (5 V × 0.6 W)
Detection distance: minimum 6 metres (depending on the environment)
Remote control range: up to 10 metres
Horizontal detection angle: 110°
Vertical detection angle: 20°
Solar charging time: 6 - 8 hours
Dimensions: 135 × 65 × 70 mm
Weight: 172g
Number of LEDs: 4
Specifications
Connection
Connectivity
Use
Detection Type
Notification
Package contents
| Code: | BENtch40 |
| Manufacturer information |
Czech Partners Group s.r.o., Hartigova 1206/87, 130 00 Praha 3 www.bentech.eu, [email protected], +420 222 310 006 
|