CONCEPT IDV6083BC
Price Guarantee
Installment calculator
4,9%
interest
from 478,- monthly
CONCEPT IDV6083BC
The Concept IDV6083bc Cook&Flow multifunctional appliance offers a combination of a hob and a powerful cooker hood. This intelligent solution saves a significant amount of space in the kitchen, as it removes the need to install a traditional cooker hood above the worktop. The extractor is integrated directly into the hob and, thanks to its low position, it captures odours and steam immediately at the source with a maximum output of up to 750m³/h. The hob features a range of modern functions that enable safe and convenient cooking. The entire system is energy-efficient, with an energy rating of A++.
Key Features of the CONCEPT IDV6083BC Hob
- Combined 2-in-1 solution, the CONCEPT hob combines an induction hob and a cooker hood
- High extraction power of up to 750m³/h
- Hob2Hood technology ensures automatic synchronisation - the extractor starts automatically and adjusts its power according to the cooking intensity
- Fresh Air function - after cooking is finished, the system automatically purifies the air in the room of residual steam
- Four induction zones can be linked to form two large flexible areas
- Intuitive touch control for quick and precise power regulation
- Powerbooster function - rapid power increase for very fast boiling
- Keep Warm mode for maintaining cooked dishes at the ideal temperature before serving
- Adjustable timer for automatic switch-off and a child lock to prevent accidental operation
- Dual filtration during recirculation
- Accessories include a cover grille, filter holder, 2× grease filter + HEPA filter, 2× carbon filter, 200ml water container, duct connector, and duct elbow
Extraction Based on Cooking Intensity
The CONCEPT IDV6083BC hob is equipped with Hob2Hood technology, which ensures automatic communication between the cooking zones and the ventilation, so the extraction starts automatically and adapts its intensity to the current cooking. Once finished, the Fresh Air function takes over to clear the air of any residual vapours.
Safe and Convenient Operation
For cooking itself, the IDV6083BC hob has four induction zones with smooth power control via a slider. The cooking zones can be linked to create two large flexible areas for bulky cookware. Each zone has a Powerbooster function for lightning-fast heating and a Keep Warm mode for maintaining the temperature of the finished dish. Safe and convenient operation is complemented by an adjustable timer for individual zones and the entire hob, a child lock to prevent accidental adjustments, and intuitive touch controls.
Extractor with Dual Filtration
The installation of the cooker hood is very versatile, as it allows for both traditional ducting to a chimney and a recirculation system using two separate carbon filters. It is this dual filtration that ensures much higher efficiency in purifying the air in the room compared to conventional models with a single filter, making the CONCEPT IDV6083BC hob the ideal helper for modern open-plan interiors. Accessories include a cover grille, filter holder, 2× grease filter + HEPA filter, 2× carbon filter, a 200ml water container, a duct connector, and a duct elbow.
Technical parameters:
Hob height: 200mm
Hob width: 830mm
Hob depth: 515mm
Extractor width: 310mm
Extractor depth: 180mm
Under-hob extraction installation — to 200mm
Built-in dimensions (H × W × D): 220 × 750 × 482mm
Weight: 20kg
Max. noise level: 64dB
Voltage: 220–240V ~ 50/60Hz, 380–415V ~ 50/60Hz
Diameter and power of front left cooking zone: 175 × 195mm, 2,000W
Diameter and power of rear left cooking zone: 175 × 195mm, 2,000W
Diameter and power of front right cooking zone: 175 × 195mm, 2,000W
Diameter and power of rear right cooking zone: 175 × 195mm, 2,000W
Max. power input: 7360W
Connection cable length: 120cm
Specifications
Kitchen hood energy parameters
Hood functions and features
Hood performance
Hob type
Cooktop features
Cooktop dimensions and weight
Ostatní rozměry
Cooktop colour
Cooktop design
Cooktop connection
Network cable
Power outlet type
Wiring and installation
| Code: | CONVD028 |
| Warranty: | 24 months |
| Links: | Product Fiche |
| Manufacturer information |
Jindřich Valenta - Concept, Vysokomýtská 1800, Choceň 56501, Czech Republic, +420 465 471 400, [email protected] 
|