DXRacer Drifting XL black and yellow

Perfect features and design

Upholstery – the latest generation NEO leatherette (EPU leather) is unrivalled in terms of durability, flexibility and wear resistance. It has been tested to outperform conventional PU leather, as it combines the best features of various leatherette samples. It is smooth and pleasant to the touch, highly resistant to abrasion, cold, stains or fading, and easy to clean. It also includes an adjustable headrest and adjustable lumbar support, which provides ideal support for the spine. The Drifting features adjustable multifunctional 3D armrests with a soft surface. They are controlled by buttons on the outside of the armrests and by the rests themselves. Adjust the height, angle up to 15°, and depth (forward/backward). The Drifting gaming chair is designed for the demands of discerning PC users, computer gamers, as well as office workers and managers.

TILT rocking mechanism

The backrest and seat tilt backwards and forwards together. It can only be locked in the basic (upright) position. It's controlled by a lever on the right-hand side; just pull it out to the side to activate the function. When you want to stop rocking, return to the basic sitting position. Push the right lever back in and the rocking will stop. The rocking tension, or rocking force, is adjusted according to your weight. This is controlled by a rotary knob under the seat. The backrest recline, ranging from 90–135 degrees, is controlled by a lever on the right side of the backrest, just like in a car seat. 90° for work, 135° for relaxation. The height is adjusted according to your height and leg length. Ideally, your feet should be flat on the floor for most of the time, bent at an angle of 90–120 degrees. This is controlled by the lever on the right-hand side.

DXRacer is the premium choice for all PC users

The DXRacer DRIFTING gaming chair has a height-adjustable headrest that supports the cervical spine, relaxes the neck and relieves neck pressure. Thanks to its wide design, it allows plenty of room for head support and is filled with high-density memory foam. The headrest includes a top-of-the-range gel layer with cooling particles that keep you cool and provide excellent air circulation and breathability. DXRacer gaming chairs are used by gamers all over the world, including top-level players. They are featured at tournaments such as LCK, UMG, MLG and in the Czech Republic also at 4GAMES and the Czech Championship in Computer Games and HITPOINT FINALs. In the Czech Republic, DXRacer cooperates with the eSuba gaming organisation. 

Package contents:
Chair, assembly instructions
Chair controls:
Chair and seat height – press the lever down slightly
Rocking – pull the lever out to the side; to stop rocking, push it back in (locks in the basic position)
Rocking tension – rotary knob to adjust the rocking tension
Chair assembly:
After unpacking, insert the castors into the arms of the cross base (five holes in the lower part of the individual arms are intended for the castors). Insert the gas lift into the hole for it, after moving it around a bit first. Mount the mechanism to the bottom of the seat (place the seat upside down to make it easy to handle, preferably on a mat or a table with a raised surface). Mount the armrests to the bottom of the seat. Attach the backrest to the seat. Place the seat with the backrest and armrests onto the gas lift with the cross base and castors. Check that you have tightened all the screws sufficiently. Done, you can now take a seat.   
Please note:
Not recommended for persons over 190cm tall.
Technical specification:
Seat height: 45–55cm
Weight: 23kg
Armrests: 3D adjustable
Product height: 130–140cm
Dimensions: 70 × 60cm (W × D)
Cross base/frame: aluminium
Mechanism: TILT mechanism
Maximum load capacity: 125kg
Castor pin diameter: 11mm
Castor diameter: 75mm
Seat width: 56cm (with side bolsters)
Material: synthetic leather
Recommended user height: 155–190cm
Package dimensions: 80 × 60 × 37cm