DXRacer PRINCE black-red, leatherette
DXRacer PRINCE black-red, leatherette
The DXRacer PRINCE is a modern, timeless and ergonomic chair, designed for the demands of discerning PC users, gamers, office workers and managers. Its strong internal steel frame makes it stable and sturdy. The Prince offers height, armrest, headrest and lumbar support adjustment, a rocking mechanism and a backrest that reclines to 135°. This chair excels in comfort, safety and ergonomic seating. The DXRacer chair is BIFMA and EN1335 certified for safety and reliability. All parts of the chair (such as the armrests, backrest, pistons, castors, etc.) have been carefully tested to ensure they meet all applicable international standards. The chair weighs 27kg and is delivered disassembled in a box. Assembly is not complicated. You can easily assemble it yourself using the clear instructions included in the box.
Key features of the DXRacer PRINCE gaming chair, black/red, leatherette
- For user height 155–180cm with a load capacity of up to 120kg
- Suitable for gaming, esports, the office or a student's room
- Leatherette finish, pleasant to the touch and comfortable
- Built for long-term sitting (8+ hours)
- Strong internal steel frame and a solid five-star nylon base
- Backrest recline up to 135° for user safety and full back support
- TILT rocking mechanism with locking in the basic position
- Adjustable rocking tension based on user weight
- High-quality gas piston meeting SGS international standards
- Universal polyurethane castors suitable for all floors
- 1D height-adjustable armrests with a soft surface
- Lumbar and headrest cushions
TILT rocking mechanism – tilt and height control
The backrest of the DXRacer PRINCE chair tilts back and forth simultaneously with the seat. It can only be locked in the basic (upright) position. It is controlled by the lever on the right side; simply pull it out to the side to activate the function. The rocking tension, or rocking force, is adjusted according to your weight. If you are lighter, you can loosen the tension; if you are heavier, you can tighten it. This is controlled by a rotary knob under the seat. Adjust the height according to your own height and leg length. Ideally, your feet should be flat on the floor for most of the time, with your knees bent at a 90–120° angle to allow the lymphatic system to flow freely and prevent your legs from swelling. It is controlled by the lever on the right side.
A well-thought-out design
The DXRacer PRINCE gaming chair lets you adjust the backrest recline between 90° and 135°. It is controlled by a lever on the right side of the backrest. Black plastic 1D armrests provide support for your arms; they are height-adjustable and have a soft surface. Adjust them by pulling them up or down using the button on the outside of the armrests. The DXRacer PRINCE gaming chair has a five-star nylon base and universal, sturdy, quiet and safe polyurethane castors (50mm diameter, 11mm pin).
Head and lumbar cushions
The DXRacer PRINCE gaming chair has removable cushions for maximum comfort, neck relaxation and ergonomic spine support. The lumbar cushion can be adjusted to various heights by pulling on the straps. The headrest contains a gel layer with cooling particles that provide excellent air circulation and breathability, keeping you comfortable even on hot summer days.
Chair assembly:
After unpacking, insert the castors into the arms of the base (the five holes at the bottom of each arm intended for the castors). Insert the piston into the piston hole, after having moved it around first. Mount the mechanism to the underside of the seat (place the seat upside down to make it easy to handle, preferably on a mat or a table with a raised surface). Mount the armrests to the underside of the seat. Attach the backrest to the seat. Place the seat with the backrest and armrests onto the piston with the base and castors. Check that you have sufficiently tightened all the screws. Done, the chair is assembled.
Chair height:
122–132cm
Please note:
The chair has a stated load capacity of 120kg, for which it has been tested and can handle such a load, but due to its design and especially the shape of the seat, it is more suitable for users up to 90kg. This is because the seat would be too narrow for a heavier person. Above this weight, the manufacturer recommends larger models, such as the Drifting, Master or Tank.
Specifications
Construction
Armrests
Castors
Material
Load capacity
Colour
Dimensions and weight
Usage
| Code: | DXRzid0053 |
| Warranty: | 24 months |
| Manufacturer information |
Mercury Star s.r.o., 1. Máje 1162, Rožnov pod Radhoštěm, 75662, Česká Republika, [email protected], +420601228882 https://app.asana.com/1/5555576762646/task/1213188049008920 
|