DXRacer PRINCE pink, fabric
DXRacer PRINCE pink, fabric
DXRacer PRINCE is a modern, timeless, and ergonomic chair designed for demanding PC users, gamers, office workers, and managers. Its strong internal steel frame makes it stable and robust. Prince offers height adjustment, adjustable armrests, a headrest, and lumbar support, along with a rocking mechanism and a backrest that reclines up to 135°. The chair excels in comfort, safety, and seating ergonomics. The DXRacer chair is certified as safe and reliable according to BIFMA and EN1335 standards. All parts of the chair (such as the armrests, backrest, gas lift, castors, etc.) have been carefully tested to ensure they meet all applicable international standards. The chair weighs 27kg and is delivered flat-packed in a box for self-assembly. Assembly is straightforward. You can easily put it together yourself using the clear instructions provided in the box.
Key features of the DXRacer PRINCE gaming chair, pink, fabric
- For heights of 155–180cm with a load capacity of up to 120kg
- Suitable for gaming, esports, the office, and student rooms
- Pleasantly soft and comfortable fabric finish
- Built for long-term sitting (8+ hours)
- Strong internal steel frame and a sturdy five-arm nylon base
- Backrest recline up to 135° for user safety and full back support
- TILT rocking mechanism with locking in the upright position
- Adjustable rocking tension based on user weight
- High-quality gas lift meeting international SGS standards
- Universal polyurethane castors suitable for all floors
- 1D height-adjustable armrests with a soft surface
- Lumbar and headrest cushions
TILT rocking mechanism – tilt and height control
The backrest of the DXRacer PRINCE chair reclines backwards and forwards together with the seat. It can only be locked in the upright (seated) position. Control it using the lever on the right side; simply pull it out to the side to activate the function. The rocking tension, or the force of the rock, is adjusted according to your weight. If you're lighter, loosen the tension; if you're heavier, tighten it. This is controlled by a rotary knob under the seat. Adjust the height according to your own height and leg length. Ideally, your feet should be flat on the floor for most of the time, with your knees bent at an angle of 90–120° to allow free flow of the lymphatic system and prevent leg swelling. This is controlled by the lever on the right side.
Thoughtful design
The DXRacer PRINCE gaming chair has a backrest that reclines between 90–135°. This is controlled by a lever on the right side of the backrest. Black plastic 1D armrests provide arm support; they are height-adjustable and have a soft surface. Adjust them by pressing the button on the outside of the armrests and pulling them up or down. The DXRacer PRINCE gaming chair features a five-arm nylon base and universal, sturdy, quiet, and safe polyurethane castors (50mm diameter, 11mm pin).
Headrest and lumbar cushions
The DXRacer PRINCE gaming chair has removable cushions for maximum comfort, neck relaxation, and ergonomic spinal support. The lumbar cushion can be adjusted to different heights by pulling on the straps. The headrest includes a gel layer with cooling particles that provide excellent air circulation and breathability, keeping you comfortable even on hot summer days.
Chair assembly:
After unpacking, insert the castors into the arms of the base (the five holes at the bottom of each arm intended for the castors). Insert the gas lift into the hole on the base, after first making sure it moves freely. Mount the mechanism onto the bottom of the seat (place the seat upside down to make it easier to handle, preferably on a mat or a table with a raised surface). Mount the armrests onto the bottom of the seat. Attach the backrest to the seat. Place the seat with the backrest and armrests onto the gas lift with the base and castors. Check that you have tightened all the screws sufficiently. Done, the chair is assembled.
Chair height:
122–132 cm
Please note:
The chair has a stated load capacity of 120kg, which it is tested for and can handle. However, due to its design and particularly the shape of the seat, it is more suitable for users up to 90kg. The reason is that the seat may be too narrow for a heavier person. For users above this weight, the manufacturer recommends larger models, such as the Drifting, Master, or Tank.
Specifications
Construction
Armrests
Castors
Material
Load capacity
Colour
Dimensions and weight
Usage
| Code: | DXRzid0049 |
| Warranty: | 24 months |
| Manufacturer information |
Mercury Star s.r.o., 1. Máje 1162, Rožnov pod Radhoštěm, 75662, Česká Republika, [email protected], +420601228882 https://app.asana.com/1/5555576762646/task/1213188049008920 
|